Difference between revisions of "Compressor"

From Audacity Wiki
Jump to: navigation, search
(P2 potential deprecation)
(legacy material removal)
Line 9: Line 9:
 
* Attack time - the amount of time the compressor waits to respond after the Threshold is reached
 
* Attack time - the amount of time the compressor waits to respond after the Threshold is reached
  
* Decay Time: ''(not available in legacy Audacity 1.2.x)'' - how soon the compressor starts to increase the volume level back to normal after the level drops below the Threshold  
+
* Decay Time: - how soon the compressor starts to increase the volume level back to normal after the level drops below the Threshold  
  
 
* Normalize to 0 dB after compressing - if this is checked, then after compression the audio will be amplified to the maximum amount possible without adding distortion  
 
* Normalize to 0 dB after compressing - if this is checked, then after compression the audio will be amplified to the maximum amount possible without adding distortion  
Line 21: Line 21:
  
 
<div id="alternative"></div>
 
<div id="alternative"></div>
== Alternative Free Compressors==
+
== An alternative Free Compressor==
 
 
 
* '''Chris's dynamic compressor''' by Chris Capel was a popular [http://en.wikipedia.org/wiki/Nyquist_%28programming_language%29 Nyquist] plug-in that tried to even out abrupt changes of volume by employing "''lookahead''" (this attempts to anticipate volume changes by starting to apply compression before the volume rises to the threshold level). There were also options to soften the softer audio and invert loudness. See instructions for [[Nyquist Plug-ins#Installation|Nyquist plug-in installation]].
 
* '''Chris's dynamic compressor''' by Chris Capel was a popular [http://en.wikipedia.org/wiki/Nyquist_%28programming_language%29 Nyquist] plug-in that tried to even out abrupt changes of volume by employing "''lookahead''" (this attempts to anticipate volume changes by starting to apply compression before the volume rises to the threshold level). There were also options to soften the softer audio and invert loudness. See instructions for [[Nyquist Plug-ins#Installation|Nyquist plug-in installation]].
** An archived 1.1 version of this plug-in can be downloaded by left-clicking [http://web.archive.org/web/20080705130736/http://pdf23ds.net/projects/compressor/compress.ny this link], then use the browser feature to save the web page in text format. Right-click and "Save Link As" or "Save Target As" may also work in some browsers. Archived documentation can be found [http://web.archive.org/web/20081120011622/http://pdf23ds.net/software/dynamic-compressor/ here].
 
** A more advanced 1.2.6 version of this plug-in can be downloaded [http://theaudacitytopodcast.com/chriss-dynamic-compressor-plugin-for-audacity/ here].
 
** '''Neither of the above versions can be modified or redistributed.''' We hope to make a freely-licensed version of this plug-in available for separate download later, based on Chris's 1.2.7 Beta version which has a free [http://en.wikipedia.org/wiki/MIT_License MIT License]. For more information, please visit http://forum.audacityteam.org/viewtopic.php?f=42&t=58958 .
 
 
    
 
    
 
   
 
   
 
{{CategoryTips}}
 
{{CategoryTips}}

Revision as of 14:22, 2 May 2014

Peter 2May14: ToDo-2 This page is a potential candidate for deprecation, the material is, or should be, handled more than adequately in the Manual.
Audacity's Compressor effect reduces "dynamic range" by making the loud sections quieter, then optionally amplifies the compressed audio to be as loud as possible without clipping. This increases the perceived overall loudness of the audio.
 
Related article(s):

The terms of the Compressor effect are as follows:

  • Threshold - the volume level at which compression starts to be applied. The further right the slider, the louder the input has to be before compression is applied.
  • Ratio - if the level is above the threshold, how much it will be reduced. For example, a 3:1 ratio implies that a passage in the original audio that became 3 dB louder would only become 1 dB louder in the compressed result. The further the slider is to right, the stronger is the compression applied.
  • Attack time - the amount of time the compressor waits to respond after the Threshold is reached
  • Decay Time: - how soon the compressor starts to increase the volume level back to normal after the level drops below the Threshold
  • Normalize to 0 dB after compressing - if this is checked, then after compression the audio will be amplified to the maximum amount possible without adding distortion

Further reading

There are some good (but not too technical) explanations of compression here:

More advanced:

An alternative Free Compressor

  • Chris's dynamic compressor by Chris Capel was a popular Nyquist plug-in that tried to even out abrupt changes of volume by employing "lookahead" (this attempts to anticipate volume changes by starting to apply compression before the volume rises to the threshold level). There were also options to soften the softer audio and invert loudness. See instructions for Nyquist plug-in installation.