Mac OS X
|Audacity is fully supported under Mac OS X. However, there are a number of quirks, and because of subtle differences between Mac OS X and other platforms, you may discover bugs or issues that are specific to Mac OS X. This page is solely for recording such OS X-specific problems, in other words those that are specific to the Apple Mac OS X operating system and thus do not occur with Audacity on Microsoft Windows or Unix/Linux systems.
|This page is intended as a reference point only. It is not constantly monitored by the Audacity team and is thus not meant as a direct method for obtaining technical support.
Before adding a report here, please:
- 1 Active issues
- 1.1 Input sources not selectable in Audacity 1.3.x
- 1.2 Input sources not selectable in Audacity 1.2.5/6
- 1.3 Audacity should not be run inside the .dmg image
- 1.4 No Unicode or long file name support
- 1.5 Loss of sound after running Audacity
- 1.6 Playthrough
- 1.7 No built-in streaming audio recording
- 1.8 Support and setup for external audio devices
- 1.9 Unresponsive Play and Record buttons
- 1.10 Untranslated strings in non-English language
- 1.11 Shortcuts activate in file dialogues
- 1.12 Audio Units issues
- 1.13 Portable Settings
- 1.14 Greyed out Audacity menu
- 1.15 "Invisible "Window"
- 1.16 DTMF Generator creates silence
- 2 Cleared issues
- 2.1 SHIFT + P does not open Pan dialogue
- 2.2 Failure to launch on managed accounts or Network Home
- 2.3 Crash when recording in 24 bit quality
- 2.4 Griffin iMic mono 8 bit recording problem
- 2.5 1.2.6 PPC only launches in English
- 2.6 Audacity won't launch on case-sensitive file systems
- 2.7 Previous Intel Mac naming issue with libmp3lame.dylib
- 3 User Reports
Many differences between the OS X and other platforms relate to the audio platform API - in the case of Mac OS X, this API is called .
Input sources not selectable in Audacity 1.3.x
Applies to: Audacity 1.3.x
In versions prior to 1.3.2, Audacity's Mixer Toolbar input selector would normally show only "Default Input Source".
Starting with version 1.3.2, the Mixer Toolbar input selector will show:
- on PPC machines, the built-in inputs available (such as Microphone, Line In or Digital In) after you select "Core Audio: Built-in Audio" (either in Device Toolbar, or via "Host" and "Recording Device" in Audacity Devices Preferences).
- on Intel machines, the single built-in input already selected after you select "Core Audio: Built-in Microphone", "Core Audio: Built-in Input" or similar (either in Device Toolbar, or via "Host" and "Recording Device" in Audacity Devices Preferences). Given that input selection can't be made in the Mixer Toolbar on Intel machines, you may want to enable the Device Toolbar at as shown in these illustrations.
For versions prior to 1.3.2, please select your input source in Apple Audio-MIDI Setup according to these instructions. Users of OS X 10.3.x can use Audacity 1.3.3 (but not 1.3.4 or later), so this issue should not apply to them as long as they use 1.3.3. Those using OS X 10.2.x should use Audacity 1.3.2.
Starting with Audacity 1.3.13-beta the Input Selector has been removed from the Mixer Toolbar, and been replaced by an improved Device Toolbar which is on by default.
Any input device available on the Macintosh will be selectable in the Input Device dropdown menu of the Device Toolbar. If you plug in (for example) a USB interface while Audacity is running, you can click onand the device will then be available in the dropdown menu.
Input sources not selectable in Audacity 1.2.5/6
Applies to: Audacity 1.2.5/6
In Audacity 1.2.5/6 the Mixer Toolbar input selector will always show "Default Input Source".
For most reliable operation, you should first select your input source in Apple Audio-MIDI Setup according to these instructions. Then start Audacity and select that same input source in , Audio I/O tab, Recording section.
Audacity should not be run inside the .dmg image
Applies to: All Audacity versions
You should not run Audacity from within the .dmg image it's distributed in. This may cause permissions problems and won't allow you to add files to Audacity's Plug-Ins folder.
Always install Audacity thus:
- Inside your Applications folder, create a folder called "Audacity".
- Double-click the downloaded .dmg to mount it
- Drag the whole of the .dmg contents (not the .dmg itself) into the "Audacity" folder you created
- Double-click Audacity.app inside the Applications folder to launch it
No Unicode or long file name support
Applies to: Audacity 1.2.x versions only
There are bugs in the Mac version of wxWidgets, called wxMac, that can affect Audacity. One bug involves Unicode support: because of this bug, Audacity stable 1.2.x versions cannot work with files or folders located inside a directory named with non-ASCII characters (usually international or accented characters). There is an additional artificial restriction of file name length, limiting your file names to 32 characters despite support in OS X for much longer names. Upgrade to the latest 1.3.x version for Unicode and long file name support.
Loss of sound after running Audacity
Applies mainly to Audacity 1.2.4 and earlier
An Apple issue whereby certain other applications lose sound after running Audacity has now been largely resolved in the current Audacity 1.2.5 (Intel), 1.2.6 (Power PC) and 1.3.x Beta releases.
If you have lost sound on your system after running Audacity, make sure you have the , and drag the entire contents of any older version to to the trash.
Launch Audacity and follow these steps:
|1.||Clickand on the tab, set:|
|2.||On the of Preferences: |
|3.||Set the Project Rate button bottom left of the Audacity screen to the 44 100 Hz.|
|4.||Close Audacity then click on theand then on .|
|5.||Click on the Audio Devices tab and on the left-hand (input) side, select your built-in audio device in the "Default Input" and "Properties For" dropdowns. On the right-hand (output) side, select your built-in audio device in the "Default Output" and "System Output" boxes.|
|6.||On both the input and output sides, change the "Format" dropdown boxes to have the same settings as Audacity (that is, 44 100 Hz/2ch-16 bit, or 44 100 Hz/1ch-16 bit). The "1ch" or "2ch" refers to mono or stereo respectively.|
- Note: If you are on OS X 10.1 or earlier, go to and perform the same changes as above.
Audacity 1.3.3 and later:
Generally speaking, the later PortAudio v19 I/O library used in Audacity 1.3.3 and later should not change system sound settings. Therefore Beta Audacity does not have a "Do not modify audio device settings..." box, and it is not necessary to launch it to restore system sound. Simply follow the instructions above for 1.2.5/6 to reset system sound in Audio MIDI Setup.
However, if you have previously run a 1.2.x version of Audacity on the machine, it is recommended to completely reset the 1.3.x Preferences before launching Audacity again. Do this by opening audacity.cfg in a text editor and removing all the content except the line "NewPrefsInitialized=1". See here for full instructions.
Note: There is one other known reason why sound cuts out on G5 machines after running Audacity. It is due to a faulty headphone (external output) jack, whereby a component internal to the jack becomes bent from use so that the computer still thinks the headphones are plugged in. Because the user may be plugging headphones into the back of the computer when using Audacity, the timing of the occurrence would make one think it was the software, but it is not. When this is the problem, the user will notice a red glow coming out of the headphone jack. Try plugging your headphones back in and then gently manipulate the headphones plug up/down and left/right so as to bend back the internal component to its correct position. When done, the red light will go off and sound will be restored.
Although Apple Audio MIDI Setup has a "Thru" checkbox for playing audio that is being recorded, this is usually greyed out. Recording playthrough has in fact been disabled since the early days of OS X, and it is left to applications to provide this. In Audacity, try either "hardware playthrough" or "software playthrough" on the LineIn. Software playthrough will have delay and some CPU load.(this is on the tab in current Audacity Beta). Hardware playthrough doesn't always work, but has no delay and does not load the CPU. You can also obtain software playthrough using a free application called
No built-in streaming audio recording
Applies to: All Audacity versions
Macs have no ability to record streaming as it plays on the built-in sound device as can be done on Windows and Linux (if the sound device has that capability). It is possible to record streaming audio from the built-in microphone, but this a very lossy method that also picks up all ambient noise. Alternatives:
- Join the line-out to line-in, then recording from the built-in input set to line-in
- Capture the stream digitally with applications other than Audacity, before it reaches the sound card (using Soundflower to do this gives Audacity a direct way to record the captured stream)
- Download the stream, if its web address is known
Support and setup for external audio devices
Applies to: All Audacity versions
Many (mostly higher-end) external Firewire Input/Output devices and some USB Input/Output devices won't work in 1.2.5/6. Try Audacity 1.3.x Beta instead which uses our later PortAudio v19 interface.
Whatever version of Audacity you have, it's advisable to set up external sound devices (such as USB and Firewire interfaces and USB microphones or headsets) in Apple Audio MIDI Setup, as well as doing so in Audacity.
- If you connected your external device while Audacity was open, click and restart it, so that Audacity can see the device
- In Audacity, select the device at in the "Recording Device" box (and in the "Playback Device" box if appropriate) (these preferences are under "Audio I/O" in earlier Betas)
- On the same tab, choose the number of "Recording Channels" required
- Open the
- Click the Audio Devices tab and make sure on the left-hand (input) side that your device is selected in the "Default Input" and "Properties For" boxes - in the image above our device is called "USB Audio Codec"
- Match the input sample rate and channel mode in Audio MIDI Setup in all places - with your Audacity settings, and with any settings on the device or in its control software: for example, if the Audacity Project Rate at bottom left is 44100 Hz and you're recording in stereo, set the Audio MIDI input "Format" boxes to "44100.0 Hz" and "2 ch-16 bit"
- If you are playing back to the device, go to the right-hand (output) side of Audio MIDI Setup, set the device as Default Output and System Output, and similarly match the settings in the "Format" boxes to your settings in Audacity and in the device
Applies to: All Audacity 1.2.x versions
The Record and occasionally Play buttons can fail to respond. Click them repeatedly or upgrade to Audacity 1.3.x.
Untranslated strings in non-English language
Applies to: Audacity 1.2.5 (Intel); 1.2.6 (PPC)
If selecting language other than English, any string that does not have a translation will appear blank instead of in English.
Shortcuts activate in file dialogues
Applies to: Audacity 1.2.5 (Intel); 1.2.6 (PPC)
When typing in save or export dialogues, the corresponding shortcuts can be activated in the main window (for example, typing "r" starts recording). Problem is probably caused (or exposed) by updating to OS X 10.5.3 Leopard or later. As a workaround, click and change single key shortcuts to ones preceded by a modifier key, such as Command. Another possibility is to paste in the required text. Alternatively, update to the latest Beta version where this and many other 1.2 bugs are now fixed.
Audio Units issues
Applies to: Audacity 1.3.1 and later
- AU GraphicEQ cannot be resized in use. See the Audio Units page for a workaround.
- AU MatrixReverb cannot be used on a mono track. See the Audio Units page for a workaround.
- Some older third-party AU plug-ins can be very slow to load on launch or unload on exit, or may completely hang Audacity on launch. See the Audio Units page for a workaround.
Applies to: Audacity 1.3.1 to 1.3.7
On OS X systems, portable settings aren't respected in version of Audacity prior to 1.3.8, instead the default user settings in the default "Application Support" hard drive location are always used. If you want to use Audacity with portable settings under OS X 10.3 (which requires Audacity 1.3.3 or earlier), please see our Portable Audacity page for a couple of workrounds.
Applies to: Audacity 1.3.2 and later
On some systems, items in the Audacity menu may be greyed out if a project is recovered and then a process is started and cancelled before completion. Workround: Click File > New and work from the new project window.
Applies to: Audacity 1.2.x and 1.3.0/1.3.1
On the Mac, closing a window does not usually quit the program. Closing the Audacity window will probably still leave the program running in the Dock. To quit Audacity, click Audacity > Quit Audacity, or use the keyboard shortcut Command-Q. In the Audacity versions mentioned above, if the program is still running in the Dock, it will appear there as an "invisible window".
DTMF Generator creates silence
Applies to: Audacity 1.3.3
Generate > DTMF Tones creates silence irrespective of Tone/silence ratio slider, due to a bug. Will be fixed in next 1.3.x release for Mac.
These issues no longer exist in current versions of Audacity. You can upgrade to the latest Stable or Beta version .
SHIFT + P does not open Pan dialogue
Applied to: Audacity 1.3.0
Shift + P doesn't open the Pan dialogue because of a conflict with the Pause hotkey.
Failure to launch on managed accounts or Network Home
Applied to: Audacity 1.3.3 only
Audacity cannot be launched on managed accounts or on non-admin accounts in the Network Home directory. The error "You cannot open the application "Audacity.app" because it is not supported on this system" will occur. This was due to the permissions of the Audacity executable being wrongly set in this version.
- Change the permissions of the Audacity executable within the Audacity.app bundle. Open Terminal.app from an Administrator account and type:
"chmod 755 <path to Audacity.app folder>/Contents/MacOS/Audacity" for example:
- Download the appropriate 1.3.2 version for Intel or PPC.
Crash when recording in 24 bit quality
Applied to: Audacity 1.2.4
Griffin iMic mono 8 bit recording problem
Applied to: Audacity 1.2.3 and earlier
Griffin iMic re-sets recording to mono 8bit only.
1.2.6 PPC only launches in English
Applied to: Audacity 1.2.6 (PPC) only
The first release of 1.2.6 only launched in English. If you have this version, download 1.2.6a instead.
Audacity won't launch on case-sensitive file systems
Applied to: Audacity 1.2.4 and earlier
Previous Intel Mac naming issue with libmp3lame.dylib
Applied to: all Audacity versions
An earlier version of mistakenly named the included MP3 encoding binary as libmp3lame.so instead of the libmp3lame.dylib which Audacity asks for. If you have this earlier version, please download the latest version from the link above.
Echo/looping hardware fault
There is an audio looping/echo is a known fault on the newest (2005) PowerBooks (17 &15 inch) There are threads on Apple's support/discussions pages. Also occurs on PPC iBooks. It seems to be a core audio problem. Possibly a data stream corruption through to the sound processors. PowerBook users are awaiting a fix. Some people think it may be a logic board fault.Killing core audio in Activity viewer seems to be a temporary cure.
Problem with 1.3.3:
Files created in Audacity 1.3.2 or 1.3.3 vanish (or are squashed to occupy a single point at the beginning of the track) when file is opened with Audacity 1.3.3.
In earlier versions, you could make them reappear by performing any kind of action and then undoing it - the envelopes would magically reappear. With the release of 1.33, this no longer works - after saving, closing, and reopening the file, the envelopes are gone for good. Others have .
I have read that this was a known bug which was repaired in 1.3.3, but that is clearly not the case.
Mac OSX 10.4.10 on a PowerBook G4, July 15, 2007
- [BP] This bug was recreated with 10.5.1 and 1.3.3 with PPC iBook.
- [BP] 10.5.2 or 10.4.11 with 1.3.3 or Head on Intel do not appear to contain this bug.