Difference between revisions of "Mixer Toolbar Issues"
(→'''Windows Vista operating system''')
|Line 97:||Line 97:|
* '''Input Selector and Input/Output level sliders missing'''
* '''Input Selector and Input/Output level slidersmissing'''
Revision as of 07:18, 31 May 2007
Input selector greyed-out, lacking the expected choices, or apparently not recording from the indicated source
One of the common problems encountered with the Mixer Toolbar is that its input selector can appear greyed out or lacking the expected choices, thus apparently preventing the user choosing the required recording source. The purpose of the selector is to link to the current mixing device (assuming this device offers a choice of input sources) and thus save the user going through a series of system menus to choose the source.
It is often assumed that Audacity controls the sources that are displayed, but in fact the displayed sources are governed by the drivers of the sound device that is currently selected as the recording device on the Audio I/O tab of Preferences. Drivers are a big issue on Windows machines, and it often happens that machines purchased new will only be supplied with generic Microsoft drivers. These may prevent the input selector from displaying all the possible inputs the device has (or any at all), or from linking properly to the system mixer (so that for example you end up always recording from line-in, or cannot apparently record at all, whatever source you choose on the input selector).
The first step towards rectifying Mixer Toolbar selector problems is to go to the Audio I/O tab of Preferences and check that the playback and recording devices are explicitly set to your sound device. Similarly if you have multiple sound devices (e.g. built-in sound and an external USB adaptor), you need to choose the ones you want to use in the Audio I/O tab. If you are on Windows and experiencing input selector problems, choose your sound device explicitly, not Microsoft SoundMapper (which is intended to map to the currently selected default Windows sound device, but does not always do so correctly).
Note that some sound devices have individual analogue > digital converters for the different inputs such as microphone and line-in. Where this is the case, these inputs are treated as separate recording devices (e.g. Realtek: Line-In, Realtek: Microphone) and should be selected in the Audio I/O tab, not in the Mixer Toolbar selector, which will be greyed out. In a similar way, Windows Vista (see below) always treats recording sources as "devices", so on this operating system the selector will always be greyed out and you must choose input sources in the Audio I/O tab.
Note that if your selected recording device is a USB or Firewire interface device, these normally do not have multiple input sources to choose from, so once again, Audacity's input selector will grey out. This is normal, and just means the selector is not needed. Any necessary configuration should be done on the device itself, or in any control software that comes with it. Examples of devices which will normally not require use of Audacity's input selector are the Griffin iMic, the Numark and Ion USB turntables and a wide variety of USB and Firewire mixers and interfaces.
Also check your sound device is not already in use. If you are on OS X or Linux and the sound device is already being used by another application, Audacity may not be able to access it for recording and the Mixer Toolbar input selector will appear greyed or minimised. Generally, this is not a problem on Windows.
If you've got this far and the problem is not solved, read the appropriate section below for your operating system and then if needs be, see the page on Updating Sound Device Drivers.
OS X-specific issues
OS X has a very different audio hardware interface to most other operating systems. As a result, there may be no (or greyed out) Mixer Toolbar, or only one audio recording source available to Audacity, which will be identified as "Default Source". You will need to click on the Mac hard disk, then on Applications > Utilities > Audio-MIDI Setup and select your required recording source (e.g. Line In) in the Audio Input section so that it becomes the source that Audacity will use. This is how Audio-MIDI Setup looks in OS X 10.4:
In OS X 10.0 and 10.1 there was no Audio-Midi Setup, so choose your recording source at System Preferences > Sound in the Apple Menu.
If you are on OS X 10.3 or higher and want to try our Beta version (currently 1.3.3) this has a later version of our PortAudio interface and may enable you to select sources in Audacity's input selector (or possibly in the "Recording Device" dropdown in the Audio I/O tab of Preferences).
Card Not Supported
Some high-end multi-channel cards on Windows systems don't use the standard Windows mixer interface and volume control, but instead supply a custom mixer application which Audacity can't hook in to. In these cases you need to select the recording settings and levels using the custom mixer application shipped with the sound card. Recording should work as normal with the card however.
Windows Vista operating system
Vista treats individual recording sources such as line-in, microphone and stereo mix" as recording devices in their own right. As a result, on Vista operating systems the Mixer Toolbar input selector will be always be greyed out. Instead, select recording inputs in the Audio I/O tab of Audacity Preferences, in the "Recording Device" dropdown. Note if you have more than one physical device (e.g. inbuilt sound and an external USB soundcard), the inputs for each physical device will be shown separately e.g.
Microphone: Realtek HD Device
Stereo Mix: Realtek HD Device
Microphone: USB Audio
Line-In: USB Audio
If selecting a particular input does not work, try selecting it in the Windows Control Panel (see the next section below).
Windows Control Panel issues
Accessing the system mixer in the Windows Control Panel and trying to select your required source there may often allow you to record into Audacity, even if the source you want isn't in the Mixer Toolbar or Audio I/O "Recording Device" dropdowns, or isn't apparently recording properly.
On Vista, the quickest way to access the mixer is to right-click over the speaker icon in the System Tray > Recording Devices. Or click Start > Control Panel > Hardware and Sound > Sound (if you're using "Classic View" there's a direct link to "Sound" in the Control Panel), then click on the "Recording" tab.
Simply click to highlight the input you want to use. Note that the "Recording" tab may not automatically show all the potentially available inputs. To view these, right-click over any device in the list, and put a check mark by "Show Disabled Devices" and "Show Disconnected Devices". To enable a particular device, right-click over it and put a check mark by "Enable". All devices so enabled should be listed in Audacity's Audio I/O tab, but may still show as "currently unavailable" in the Windows "Recording" tab if they do not have an active input.
On XP or earlier, right-click over the speaker icon in the System Tray > Adjust Audio Properties. Or you can click Start > (Settings) > Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio devices. Then click on the Audio tab, then on "Volume" under the "Sound Recording" panel:
and select your input by putting a mark in the check box:
Note that input sources are sometimes available to use, but hidden. To check this, click "Volume" under the "Sound Recording" panel again, then Options > Properties. Select your sound device in the Mixer Device panel, and ensure all the boxes in the window below are checked:
Click OK. If the source you wanted was in the window list, it will now be available to select in the recording Volume Control, and you may find Audacity's Mixer Toolbar has now been re-enabled.
If the input you want cannot be made to work or made available, or if you want the convenience on XP or earlier of selecting your source in Audacity's Mixer Toolbar , see the Updating Sound Device Drivers page.
- Entire Toolbar (Input Selector and Input/Output level sliders) missing
If Audacity's entire Mixer Toolbar (i.e. the input and input level sliders and the input selector) is missing, this usually means that the version of Audacity you have installed has been built without PortMixer support. This could be because your Audacity version was built wrong, or because it's using an (experimental) v19 version of PortAudio which hasn't got PortMixer support. If you click on Help > About in Audacity, you should find the version of PortAudio that has been used and a list of which libraries were enabled at build time.
To enable Audacity's Mixer Toolbar, you can either install from a package which has PortAudio v18 or compile Audacity from the stable source code using PortAudio v18. For instructions on using the source code to compile Audacity, see CompilingAudacityForBeginners.
If you want to compile Audacity with PortAudio v19 (which gives native ALSA support) and also want to have a Mixer Toolbar, you must use the unstable 1.3.2 version of Audacity. There may not be a 1.3.2 package yet for your particular distribution, but you can compile Audacity from the unstable source code. If you want native ALSA support in Audacity 1.2.6, you could compile it with PortAudio v19, but this is no longer supported, and means you will have to choose your input source and the input/output levels in ALSAmixer. If you can select sources in the Mixer Toolbar selector but cannot record, or you don't see the input sources you were expecting, you could try going to ALSAmixer and select the source you require there.
- Input Selector minimised but level sliders present
If the selector just appears as a small lump but you have the input and output volume sliders, this usually means that there is currently no audio device available to, or recognised by Audacity for recording on your system. There are various possible causes for this. They include:
- Another audio program like XMMS is using the sound device
- A sound daemon like esound (ESD) or aRts is using the sound device
- You have system sounds turned on in a desktop environment like Gnome or KDE
- You don't have the correct permissions to access the sound device
- You are using Audacity 1.2.6 and are selecting the ALSA device but don't have the necessary OSS emulation modules installed.
- The recording device you currently have selected on the Audio I/O tab of the Preferences only has one input source, and so there is no choice that can be made. Many USB and Firewire Input/Output devices fall into this category.
So, any other applications using the sound device must be disabled, unless you are using the OSS device and the aRts daemon, in which case you can use the wrapper provided by aRts and run
$ artsdsp audacity
Note that some users report recording issues when doing this.
If you use OSS, you need to check that /dev/dsp (the OSS device) is present. If you use ALSA, you need to get the OSS emulation for ALSA installed, unless you are using Audacity 1.3.2 which supports ALSA natively. You can launch Audacity from the command line as
$ aoss audacity
which will load OSS emulation modules for ALSA if you have them installed.
On many distributions you need to add your user to the "audio" group so they have permissions to access the sound devices.