Difference between revisions of "PlaybackTips"
(add another tip for smooth playback)
|Line 38:||Line 38:|
Revision as of 20:43, 14 September 2008
If you have a very long Project with multiple tracks open, this eats a lot of computer resources and you will likely need far in excess of Audacity's stated minimum requirements (64 MB RAM, 300 MB Processor) for playing back of these tracks together. Think of 500 MB RAM and 1 GHz processor speed upwards, depending on the number of other programs and processes that are running and the number and length of tracks you want to have.
Generally the more RAM you have the better, though Windows 98 and ME have a bug that may cause problems if you have more than 512 MB installed RAM. There are suggested fixes for this problem .
Consider enabling DMA on your drive if it is not already, and ensure your sound device drivers are up to date. Both these courses of action may improve playback of long tracks and will also help to ensure glitch-free recording. Consider reinstalling the operating system if updating your sound drivers does not help - operating system problems can lead to erratic sound behaviour especially when the CPU is busy.
Also try these tips if you are having problems with uneven playback:
- try exiting and restarting Audacity or rebooting
- close as many other programs as possible
- go to the and set the Default Sample Format to 16 bit, which halves the work the computer needs to do to play the tracks.
- zoom out (CTRL + 3) or
- muting the tracks you don't need to hear will help slightly
- select areas of tracks rather than the whole, in order to hear what a mix sounds like
- select all of each track in turn (by clicking in the Track Panel where the mute/solo buttons are) and ( in 1.3.2 or later). This may help playback by ordering the audio data files more logically.
- consider mixing some tracks together as soon as you no longer need them to be separate.
- consider cutting tracks you are not currently working with into a new project window ( ). This will make a big difference.
- In Audacity 1.3.3 or later, consider increasing the default "Audio to buffer" setting of 100 milliseconds. This can be changed in the "Latency" panel in the . This might lead to smoother playback on slower machines. The disadavantage would be that playback would take longer to start, and there would be more delay in laying down and monitoring recordings.
The left-hand output volume slider on the controls only the output volume at which you hear your tracks. It has no control over the level of gain (if any) that is applied to the tracks when exported. This gain is controlled with the -....+ gain slider on the
. It follows that moving the output volume slider does not affect the level of output indicated in the green VU playback meter in the Meter Toolbar: only the gain slider will affect this, or of course changing the track volume by editing.
Avoid accidentally moving the gain slider away from centre when you come to export your audio file. If the slider goes too far too right, this may lead to excessive volume and therefore distortion in your exported file. If it goes too far to left, you may negate the volume of the file.
Also note that if you play multiple tracks at once, their volume is combined. Therefore with multiple tracks you may need to move the gain sliders on each Track Panel leftwards to bring down the combined volume of the tracks. To keep the current balance between all your tracks, move each slider to left by the same amount. To judge if you have distortion, look at the green VU playback meter. If the green bars are hitting the right-hand edge of the scale and so bringing on the red hold lights to right of the meter, you have distortion in the output and must reduce the gain.
If the VU meters are not visible, go to theand check . If you are using the Beta 1.3.3 version of Audacity, click .