Principles of Chorus

From Audacity Wiki
Revision as of 17:30, 6 September 2012 by PeterSampson (talk | contribs) (splitting this material off from the Delay page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Peter 6Sep12:
  • Material heres is transferred directly from the old pages in the Manual (now deleted).
  • The page title is purely a working-title. I welcome suggestions for a revised title prior to publication.

A chorus is a Delay for which the delay time is modulated by a Low Frequency Oscillator (LFO). The most used LFO waveforms are sine and triangle.

Most modern chorus effect unit, be they plugins or hardware based, also spread the effect signal across the stereo field. Sometimes a parameter to control the depth and other behaviors may be encountered.

The effect can produce interesting sounds, one of which is to produce the illusion of more than one instance of the instrument/vocalist being present. What you get out of this effect, largely depends on your desire to experiment.

Play with the parameters one at a time and experiment.

Diagram of the Chorus Effect

Common parameters of a Chorus

Parameter Range : 0.0 to xxx.xx milliseconds

This is your normal delay parameter.

Parameter Range : 0-100% or sometimes in milliseconds

This determines the maximum amount of modulation applied to the delay time.

Parameter Range : 0 - 20 Hz (frequency)

Also sometimes referred to as the LFO frequency. Higher frequencies produce extreme effects.