|Audacity lets you record for as long and as often as you need, subject to the disk space you have available. |
Recording time/disk space remaining
When recording, the audio data is written to your hard disk. For example, if you just press the red Record button without having yet saved a Project, it's written to Audacity's temporary folder. Therefore, the amount of time you can record for is limited by the available disk space on the drive you are writing to. Audacity lets you know the amount of time you can record for based on that remaining space. Older versions of Audacity had a confusing "recording time remaining" message which did not make this clear. However current versions of Audacity which you can always download give a clear indication in the Status Bar at the bottom of the screen as to how much time you can record for:
The time remaining depends on the current space on the drive, and on the quality (sample rate and bit depth) you are recording at.
Although there are rarely problems if you record to Audacity's temporary folder and then save the recording as an Audacity Project, it may be preferable if you're intending to save a Project to save an empty Project before you start recording, with thecommand. That way, the recorded data will be saved to a permanent location in the Project's _data folder. When the recording is over, and now and again thereafter, use (not ) to update the Project.
Increasing disk space for longer recordings
To get more recording time:
- Obviously, free up some more disk space. One good way to do that is to ensure you delete your old Audacity Projects (the .aup and any .aup.bak files and the _data folders) as soon as you've finished the Project and are sure you won't need to export any more files from it.
- Save the Project you're starting (or change the location of Audacity's temporary folder) to a disk with more space on it. The location of Audacity's temporary folder can be changed on the .
- Audacity only uses uncompressed (so lossless) PCM audio data for recording and editing, but the amount of disk space consumed can be reduced by changing the following settings in Preferences:
- on the , record in mono instead of stereo. This halves the disk space used.
- on the , reduce the Default Sample Format (bit depth) from 32-bit float to 16-bit, which again halves the disk space used. In speech recordings you may also be able to reduce the Default Sample Rate without significantly affecting the quality. Generally for music, leave the Sample Rate at 44100 Hz, but if 22050 Hz gives acceptable quality, it takes only half the disk space of 44100 Hz.
- Note that because unlimited undo is available in an Audacity session, editing a project itself uses disk space. To reduce the space a project is taking, , exit Audacity and relaunch it. This will clear out the space being used by the Undo mechanism. Alternatively, leave the project open, click and discard the Undo levels you do not need.
- 44100 Hz, 32 bit, stereo = 20 MB of space per minute. 44 100 Hz and 32-bit are Audacity's default quality settings
- 44100 Hz, 16 bit, stereo = 10 MB per minute. CD quality
- 22050 Hz, 8 bit, mono = 1.25 MB per minute. This would be generally acceptable for speech recordings from lower quality sources
Note that reducing the sample rate will reduce the audio frequency limit. 44100 Hz gives a theoretical maximum of less than 22kHz that can be captured. A sample rate of 22050 Hz gives you less than 11kHz. For speech, you can take out the high frequencies without much loss of intelligibility. Likewise, reducing the bit depth reduces the dynamic range of the audio. For example, 16-bit gives a whopping 96dB of dynamic range. 8-bit recording reduces dynamic range to 48dB. A 22050 Hz, 8-bit recording would rival the sound of a good quality cassette tape.
Note that disk space usage above relates solely to the size of audio data held by Audacity, not to the size of audio files exported from it. You need this space to record and edit, but if you don't save an Audacity Project, the temporary data is deleted and the space released as soon as you exit Audacity.
Current Audacity stores samples as 64-bit values (even on 32-bit machines). Therefore unlike some legacy 1.2.x and 1.3.x versions of Audacity, there is no inherent 32-bit limitation that recordings may not exceed 2^31 samples in length (which is for example just over 13.5 hours at 44100 Hz sample rate).
44100 Hz now offers a theoretical maximum recording length of a mere 58 billion hours or more than 6.6 years (if you have the disk space).
- Peter 12May14: Surely we can move the "meat of the content" into Legacy Wiki right now - as Legacy Wiki is valid for versions up to and including 2.0.5. When 2.0.6 is released we can deprecate the 2.0.5 content.
- Gale 13May14: OK, then, please copy the material below this ednote to Legacy Wiki. But in that case I reinstated your "legacy cruft" excisions because they will be wanted over there. I do want the point about 1.2/early 1.3.x having a 32-bit limitation here as a "benefit" of upgrading and a little historical context.
Problem with long recordings saved as projects
|Audacity projects containing more than 2^31 samples will re-open empty with the entire data being seen as "orphaned files" (although the data "appears" to be in the correct location expected by the AUP file). Workarounds:
Further notes on large audio files
WAV files should not exceed 2 GB in size for practical purposes, and the absolute maximum is 4 GB. For longer lossless files you can use FLAC on Mac or Linux (there is a 2 GB size limit in Windows). On any platform in Audacity 1.3.13 or later you can export larger lossless files up to about 16 exabytes in size using RF64. RF64 will be about the same size as WAV files (that is, about twice as large as FLAC). To export as RF64, choose "Other uncompressed files" then click .
Further help for users of 2.0.5 or earlier
If you don't use 2.0.6-alpha or have problems reopening the excessively long project, you may try the following.
- Split the project into smaller projects, adjusting each AUP file so that the "h" value is zero, the correct _data folder is pointed to and the "numsamples" and "waveblock start" values are corrected (a script must be used to perform this correction because thousands of values will be involved). See http://forum.audacityteam.org/viewtopic.php?p=214543#p214543.
- Do not use the AUP file but split the data into smaller _data folders. Each folder should not exceed 1 GB in size. If the project was created in Audacity 1.3 or later, time-sort the AU files in each folder then rename the files into a consecutive sequence. Use the Audacity 1.2 Recovery Utility to recover each folder to a separate WAV file (one WAV per stereo channel), then import the WAV files into Audacity and join them together.
This method may cause some sections of left and right stereo channels to be transposed on Windows FAT32, Mac OS X and Linux (ext3 or earlier) file systems due to their limited timestamp granularity. Also, only unedited recordings can be recovered in correct timeline position by this method. See the Crash Recovery page for details.