Difference between revisions of "Release Checklist"

From Audacity Wiki
Jump to: navigation, search
m (Taking a look at the second P1)
(Reword P1 "lost clipboard content when closing project"; add two new P4s for "auto-fit project")
Line 74: Line 74:
|valign="top" width="25px"|<font color="red">'''P1'''</font>
|valign="top" width="25px"|<font color="red">'''P1'''</font>
|<font color="red"> '''New window does not come up on top''' </font>
|<font color="red"> '''New window does not come up on top.''' </font>
*'''GA:''' Confirmed on XP and Vista. Applies to File > New, Open and Recent Files. On Vista you can still task switch with ALT-Tab, but rated as P1 because this bug breaks Task Switch on XP. There are still two icons in Task Switch but switching between them shows the same waveform. The obvious (incorrect) assumption is that the new project has been opened with copied data and this leads to serious confusion. The only way out on XP is to click the Taskbar icon and choose the popup icon for the required window.     
*'''GA:''' Confirmed on XP and Vista. Applies to File > New, Open and Recent Files. On Vista you can still task switch with ALT-Tab, but rated as P1 because this bug breaks Task Switch on XP. There are still two icons in Task Switch but switching between them shows the same waveform. The obvious (incorrect) assumption is that the new project has been opened with copied data and this leads to serious confusion. The only way out on XP is to click the Taskbar icon and choose the popup icon for the required window.     
|valign="top"|<font color="red"> '''P1''' </font>
|valign="top"|<font color="red"> '''P1''' </font>
|<font color="red"> '''Clearing to a new, empty project (File > Close last window when Preferences set not to quit) removes the clipboard content.''' </font>
|<font color="red"> '''Closing any project window removes the clipboard content.''' </font>
*'''DanH:''' Am taking a look at this.
*'''DanH:''' Am taking a look at this.
Line 352: Line 352:
|'''Dragged down track snaps back to fit after gain or pan when "Automatically fit vertically zoomed" enabled.'''
|'''"Automatically fit" preference: resized track snaps back to fit after any edit or gain/pan change.'''
* '''GA:''' Many users find this irritating because you cannot adjust gain and pan in one step, or leave track dragged down while adjusting gain/pan. Better to let user choose to refit with the menu item or when applying an effect.
* '''GA:''' Many users find this irritating because you cannot adjust gain and pan in one step, or leave track dragged down while adjusting gain/pan.
* '''GA:''' Agreed solution is to change behaviour so that fitting only occurs automatically when adding or deleting a track.
|'''"Automatically fit" preference: tracks not re-fitted if tracks added or deleted then undone/redone.'''
|'''"Automatically fit" preference: Time, Label, and Note tracks not re-fitted.''' 

Revision as of 01:26, 4 July 2009

This is the de facto bug list for all Stable and Beta releases of Audacity. The current suggestion is that Beta releases are blocked until all P1 bugs are fixed, and Stable blocked until all P1 and P2 bugs are fixed. There is no pre-determined plan for dealing with lower priority bugs.

  • Items added as Priority P1, P2 or P3 should be added to Known Issues, unless they are absent from the published release that page refers to. When cleared, move the items down to the "Cleared in CVS" section of that page.

Please also refer regularly to these pages:

Documentation Checklist, for documentation changes needed for 1.4 Manual and any developer recruitment drive.

Wording, where we track suggested changes to the exact words that appear on a dialogue

Pending website changes where we post suggested wording or layout changes to our audacity.sourceforge.net and audacityteam.org sites (except the Wiki).

Unless indicated by discussion against particular items, these should be regarded as needing attention. When processed, please move them to the "Done" section of those pages.

  • There are companion pages to discuss and monitor development of our audacityteam.org sites: Wiki Development Checklist (for both this Wiki and the Manual Wiki) and Forum Development Checklist. Relevant items include security issues, bug fixes and enhanced functionality through installing additional extensions.

Essential changes

These are other changes to source code that are deemed essential We will do all of these for final 1.3.7 release candidate or 1.4.0 release as noted below.

  • Help/Manual issues. These are needed for 1.3.7 rc:
    • Repair the script to extract zipped html help from the Manual Wiki. If this is impossible, James could make a snapshot zip using Wget and a file rename script .
    • Installer to be modified to also install Html help. Consider giving Windows installer an option to install help for all users, not just current user.
    • Address documentation issues, including website updates.
    • For 1.4, "completing the Manual". Needed before we can release any versions of 1.4.
  • Nyquist plug-ins (for 1.4): Gale to keep an eye on the Nyquist plug-ins provided in the Audacity Plug-Ins folder, possibly commit others requested by users if they work satisfactorily, such as binaural tones and Sequencer. On Windows/Mac, add the src/plug-ins folder to the installer but also add latest versions of GVerb.dll, Hard Limiter.dll and sc4.dll which are not in CVS. No special action is needed on Linux, as any *.ny plug-ins from the plug-ins dir are installed, except those deleted when the tarball is created using scripts/maketarball.sh.

Rating Keys for Issues

All issues are given a Priority Rating of 1 to 5 as follows:
P1 Blocks any Release - See the discussion page for a guide to what may be deemed an issue that blocks release.
P2 Blocks a Stable Release, but not a Beta. Maybe only affects a limited number of users.
P3 Not a blocker, but deemed worthy of release-noting if unfixed, so should not be ignored and left to mount up.
P4 Clear benefits from fixing, but not sufficiently important to release note. May include easy fixes giving considerable benefit relative to the time involved.
P5 Only just important enough to be fixed. It could be done in "spare time", or by someone learning the code.
Believed fixed but awaiting confirmation (cross-platform issues should be tested on at least two platforms)
R Regression on 1.2.6. Mainly used as an indication that a lower priority item could be promoted. Many issues not marked as regressions may well be so.

Blocking Issues

P1 (Block any Release)

P1 New window does not come up on top.
  • GA: Confirmed on XP and Vista. Applies to File > New, Open and Recent Files. On Vista you can still task switch with ALT-Tab, but rated as P1 because this bug breaks Task Switch on XP. There are still two icons in Task Switch but switching between them shows the same waveform. The obvious (incorrect) assumption is that the new project has been opened with copied data and this leads to serious confusion. The only way out on XP is to click the Taskbar icon and choose the popup icon for the required window.
P1 Closing any project window removes the clipboard content.
  • DanH: Am taking a look at this.

P2 (Stable Release Blockers)

P2 Plot Spectrum: unwanted window switch.
  • GA: To reproduce:
  1. Open Audacity and generate a tone
  2. Plot Spectrum (close it or leave it open)
  3. File > New (you will have to task switch or click on the correct section of the Taskbar button to see it, due to the P1 above)
  4. Import an audio file (easy to see the difference)
  5. Plot Spectrum and it appears with the plot of the audio file, but the window switches to that for the tone
P2 Chains: some effects apply parameters last used via Effect menu instead of those stored in chain.
  • GA: To reproduce:
  1. Create a chain with a Normalize effect of -10 dB.
  2. Generate default chirp (0.8 amplitude), click Effect > Normalize, change value to -0.0 dB, click OK
  3. Edit > Undo
  4. Apply the chain you created to the chirp and it is normalized to -0.0 dB
    Confirmed the bug affects Equalization, Leveller, Normalize and Truncate Silence. Confirmed does not affect Amplify; Bass Boost; Change Pitch, Speed, Tempo; Compressor; Repeat; Time Scale.
    From feedback from chain users, I suspect the ideal would be complete independence of the value stored in the effect dialogue from that stored in the chain. Neither setting the chain parameter nor running the chain should change the effect dialogue value. If this is deemed correct, it should be a P3 bug; if felt to be subjective, probably a P5 to add a preference when chain preferences are expanded.
P2 Crash applying non-zero Speed, Tempo, Pitch or Sliding Time Scale effects if label and time tracks present.
P2 Chains applied to files do not clear temporary files after processing each file.
  • GA: Makes unattended processing of many files impossible.
  • DanH: Working on this - see list for possible fix
P2 Applying EQ to short selection regions silences the audio near the end of the region.
  • GA: To reproduce:
  1. Set project rate to 8000 Hz (irrelevant, except makes the bug easy to see)
  2. Generate a tone of 24907 samples in length
  3. Apply EQ (Flat or any preset should reproduce the issue)
  4. Observe about 1900 samples silenced near the end of the region
P2 Audio generated or pasted when cursor is in white space overwrites instead of inserts.
  • GA: To reproduce:
  1. Generate tone
  2. Drag 5 seconds to right with Time Shift Tool
  3. HOME then generate 1 second tone
    Note that insert *is* done if the length generated/pasted exceeds the available white space.
P2 Some VST plug-ins have two instances if vst-bridge is present.
  • GA: Agreed that Ladspa loader should specifically look for and ignore vst-bridge on Windows and OS X
P2 Cursor jumps to start of scroll after playback cursor goes past scroll
  • GA: Import a file, place cursor in centre and zoom in four or five times. Then play a few seconds of audio so that the cursor goes past the scroll. Press Space and the timeline remains where stopped (maybe OK). Press Space again and playback restarts from original point but that is now at far left of scroll, not in the middle. The context preceding that playback position is now lost, requiring a fiddly drag back on the horizontal scrollbar, or a zoom out and back in. Or, you must draw a selection region when you may not want to do so. Very irritating for repeated zoomed-in editing at one spot.
P2 Clearing to a new, empty project (File > Close last window when Preferences set not to quit) leaves the new window without focus
  • GA: Confirmed on XP and Vista (not an issue in 1.3.7). Decided on P2, not lower rating, because this would I assume be a major problem for VI users.
P2 "Advanced Mixing Options": custom mapping of inputs to outputs broken.
  • GA: Clicking input and output boxes to link them does not work - see Manual for how it is meant to work
P2 Nyquist effects, SoundTouch, SBSMS and Generators join separate clips together.
  • GA: The white space between clips is replaced with silence and a split line inserted at the left-hand boundary of the former clip (generators replace the whole region with the generated audio).
P2 Ensure all Edit menu items consistently enabled and work consistently when select-all-on-none enabled. See here .
  • JC: Is it really what we want? E.g click split-new twice, and we get four tracks. Is it not less confusing to leave it greyed out?
  • GA: If you turn off select-all-on-none, and with one track on screen, Select All, Split New, Select All and Split New, you also get four tracks, so I think it is what we want. Now, if you have a track selected with no time area selected, nothing on the clipboard and click the Edit menu, all the edit menu is enabled except Paste. But if we click outside the track(s) so that none are selected, we lose ability to click on Split Cut, Trim, Delete, Split Delete, Silence, Join, Disjoin, Duplicate and Find Zero Crossings - yet we could still Cut, Copy and Split (FWIW) and Split New. I think that will be very confusing as it's a halfway house between Select-all-on-none and not. So all Edit menu items, and File > Export Selection to be available even if no tracks are selected and when clicking outside the tracks.
  • David B. suggests longer term having two independent preference options for selecting all tracks and selecting all audio to give more control.
  • MJS: I suggest (after reviewing the menus):
    • Leave grey:
      • "Export Selection..." - there isn't a selection.
      • "Split Cut" / "Trim" / "Split Delete" / "Split" / "Split New" - they make little sense without a selection.
    • Allow with "select all":
      • "Cut" and "Copy" - to cut/copy the whole lot and paste into another project, maybe?
      • "Delete"
      • "Silence Audio"
      • "Join" - to join up everything
      • "Detach at Silences" - as above
      • "Duplicate" - as above
      • "Mix and Render" - makes sense
      • "Resample" - makes sense
      • "Remove Tracks" - makes sense
      • All (most?) of the effects.
P2 (was P3) R   Export Multiple fails with no export or warning if an empty label is encountered.
  • GA: To reproduce:
    1. Generate a tone
    2. Click in track, CTRL + B, click, CTRL + B along the track
    3. File > Export Multiple and hit Export
    4. Click Export button but nothing happens
    If "Include audio before first label" is checked, the metadata window appears for the "audio before" file, then returns on OK to the Export Multiple dialogue.

    In 1.2.6, export multiple with empty labels creates files ".wav", "-2.wav", "-3.wav" (or whatever format) and so on. Maybe that should be followed here (except "-1.wav" for the first automatically generated file might be better).

  • LLL: Or would it be better to ask the user to specify a name if it encounters a blank label? Similar to the dialog you get if you have a ":" or "/" in the label.
  • GA: It's a good idea, but the case for it is not so clear as it is with illegal characters. I know some users who always export empty labels to save typing and are happy with the autonaming, so would not welcome a large number of prompts. Could the prompt include a checkbox "Always export empty labels automatically" and that is then set in .cfg?
  • LLL: If that's the concern, then they should be just as happy with us providing a name for them, like "untitled" or "unnamed" or "empty" or "Automatically Generated Name Because It Was Blank". The empty name causes unnecessary coding hackage to create the "-1" file and on at least OSX, a file beginning with a "." will be hidden and not seen if the user tries to open it.
  • GA: Obviously I assumed recreating the 1.2.6 behaviour did not have such problems. The issue is not the name itself, but that user will not want prompts for every track (as happens with the "illegal" prompt) if they prefer to use empty labels. So are you OK with one prompt, they choose what it is (or use our default), then we append a suffix as per "numbering consecutively")?

    Just remembered: the "numbering consecutively" suffix is described as a "prefix" in the Export Multiple dialogue, and a few have been complaining about that misnomer. Some users think it should actually be a prefix but looks as if too much work (?). Either way, I'd like to see the "nn" form as per standard on audio CDs, so we lose the problem with folks who don't have natural number sort. Or, it could be an option, default is "nn".

  • LLL: Give it a try. I applied Rupinder's patch to correct this P2 and instead of blank names they'll be called "untitled" and I added a list of files exported on the final status dialog to let the users know what the final names were. See how it feels. It can be easily removed.
  • GA: I like it. Since there is no other specific information to help users who have left just one label blank, I wondered if we should replace "untitled" with "empty_label" which makes it clear? I think people would prefer that the second and subsequent files included "empty_label" or "untitled" though. So, "empty_label.wav", "empty_label-2.wav" and so on. Is that easily done? I do think "empty_label-1.wav" for the first file "would" have been better, given we adopt this -1, -2, -3 ... scheme for "numbering consecutively".
  • LLL: Not sure if "empty_label" would work if there are other cases when a blank filename were possible. I can't think of any off hand though, so if you can't either, we'll change it to "empty_label". The problem with having "-1" is that it really isn't a counter of the label being exported, it's a counter of what files already exist with the name. But, let me fiddle with it a bit. I think I have a solution.
P2 (was P3) Labels should move with all the timeline changing effects. They do not move with Effect > Repeat, Reverse, and Truncate Silence.
P2 (Linux only) Crash undoing a label edit, or repeatedly undoing/redoing addition of a label. See this thread. Also see a possibly related intermittent P4 crash removing label tracks.
  • LLL: This is (probably) fixed now...just needs verification.


P3 Release Noted (Prioritised non-blockers)

P3 R  Unreliable project re-opening with orphaned and missing blockfile errors.
  • GA: There are reports every week of users losing data correctly reopening a 1.3 .aup file in the exact same 1.3 version they created it in. "Orphaned" or "missing" blockfile errors are received and when users accept the "recommended" course to delete, the project is silenced. This frequency of data loss is not acceptable in 1.4.0. We should be on the alert for these issues, and as soon as steps to reproduce are found, escalate the specific problem to P2. One definite scenario where this has been reported is having multiple projects open, and blockfiles are saved to the wrong _data folder. GA has not yet managed to replicate it, though still has some more reported steps to try and do so...
P3 R   (reported on Mac) Unreliable project re-opening due to duplicate attributes
  • GA: When a saved project is re-opened it fails with "duplicate attribute" error. Almost always involves imported MP3s; the .aup file shows one or more tags with two "name" attributes, for example <tag name="ARTIST" name="ARTIST"/>. Changing second "name" to "value" allows project to re-open. GA (Windows) and a Mac tester have tried to reproduce this with an MP3 that created this issue for one user, but the projects re-opened perfectly. Bug also reported to occur if a diacritic is included in a label.
P3 Unreliable Automatic Crash Recovery.
  • LL: I've seen some really strange (attempted) recoveries. I haven't yet looked into them, but I shall soon since my wife is complaining about it as well.
  • GA: These known problems have been reported. They should be verified and escalated to P2 if valid:
    • If a crash occurs with two tracks open, multiple projects are recovered
    • Recovery fails if a track is imported then another added after the autosave interval
    • Complete recovery failures (empty projects) seen on single tracks which are only generated tones.
    • (Mac) freeze on Intel Macs when starting recovery
    • (Mac) (Intel and PPC) "Junk after document" warnings then recovered project is empty. See here and download here an example auto save file and _data folder.
P3 R  AIFF files created by Audacity from recorded or generated data import intermittently (but at times very frequently) as noise - files play fine in other software.
  • GA: Much of the time, 1.3.7 or later on Windows cannot be relied on to import files exported with the explicit "AIFF (Apple) signed 16 bit PCM" filter. Appears to affect exports from recorded data (at any Defauit Sample Rate), or from tones generated at 24-bit. Same problem occurs with the AIFF 24-bit option accessed with "Options" button, but not apparently the comparable 16-bit option. Export Multiple seems affected the same way as regular export. Tested at 44100 Hz, reading directly. On Mac, a user 22 March 09 reports 1.3.7 "suddenly" producing noise when importing AIFF files where it did not before in many similar imports - user changed default sample format to 24-bit at about the same time. More details here.
  • LL: Gale, have you been able to find a pattern to recreate this? I've tried numerous variations on OSX and Windows and it always seems to import ok.
  • GA: Are you using a release build? In ANSI Release from HEAD, I created a chirp tone in 24-bit quality, recorded it using stereo mix then exported only the recorded track using the explicit (no options available) AIFF (Apple) signed 16-bit PCM choice. I changed Quality to 32-bit, closed the tracks and repeated the generation, record and export. I am not getting noise on importing the files back into Audacity but what I can replicate is that about half the time the files will crash both HEAD and 1.3.7 Unicode Release; if they don't crash they import properly. So behaviour compared to when I last tested is not the same. I have tried importing with the "All supported files" and "FFmpeg-compatible files" filter and the problem is identical. In 1.2.6 I can import these files dozens of times without problem.
P3 Changes in available devices not detected without restart.
  • GA: A significant reason for users' USB devices not appearing in Audio I/O Preferences.
P3 Compressor: Achieved attack/decay times much shorter than selected in interface.
P3 (reported on Windows) At 120 DPI, importing a second stereo track causes the pre-existing stereo track above to split.
  • GA: See after importing second track. If you mute the upper track, that only mutes the right-hand channel so you still hear the unwanted left-channel. To make the pre-existing track stereo again you have to up-arrow.
P3 "Advanced Mixing Options": right channel of unsplit stereo pair called "Audio Track - Right".
  • GA: Confusing if you have other tracks not renamed from default because you cannot tell which is which unless you know ordering is done by track position. Note: If you "Split Stereo Track" the fault is corrected (even if you "Make Stereo Track" again).
P3 (reported on Windows) Timer Record unreliable with recordings straddling midnight
  • GA: If recording starts on one day and end on another, recordings may carry on after scheduled end time and cannot be cancelled, requiring a force quit of the application. Elapsed and remaining time will appear frozen at some values consistent with the schedule. No repeatable scenario is known, but for those regularly scheduling midnight spans, the freeze occurs quite regularly. A system clock change is a possible explanation (see next item).
P3 (reported on Windows) Timer Record cannot maintain scheduled duration if system clock changes
  • GA: Schedule a five minute recording for immediate start (start time immaterial), OK, then change system clock to one minute before end of recording. Elapsed time and remaining time will jump to reflect changed system time, and recording will end having produced just over one minute of recording.
    Schedule that recording exactly the same and change system time to one minute after the end of the recording. With 1.3.8 Alpha from 04 June 09, recording will cease immediately, having produced a few seconds of recording. In a previous test of 1.3.8 Alpha from 29 April 09, an hour long recording straddling midnight had its elapsed and remaining times frozen when system clock changed to after end of recording, and carried on after originally intended duration, but could be cancelled. Repeating that same hour long test straddling midnight in 04 June 09 build simply aborts recording when time changes, yet Timer Record code did not change between those dates.
    Are these fixable by relying on a Widgets timer for duration? Many people synchronize system time to online atomic clocks (Windows XP does it by default).
P3 Modal block circumventable using File > New (Mac only) or shortcuts, leading to risk of crash. See this thread.
P3 (was P2) If shortcut for "Add label at playback position" is an unmodified character, the second time the label is confirmed by ENTER, that shortcut will be entered in a label placed at the start cursor. Using up arrow instead of ENTER avoids this problem.
P3 Muting specific time-shifted mono tracks when exporting produces audio at wrong point on timeline in exported file if muted tracks are to left of unmuted.
P3 WAVEX (Microsoft) headers: GSM 6.10 files cannot be exported, and U-Law/A-Law files may not be playable.
P3 LADSPA Multiband EQ may not be visible in Effect menu (occurs on Windows XP), and crashes soon after opening.
  • VJ: The logic needs to be fixed to set rstart to a valid value in all cases, because after initializing rstart to 0, it crashes in LadspaEffect::ProcessStereo().
  • LL: I think we've gotten past that, but now there's a crash during cleanup. It's due to a memory overwrite past end of the "comp" array in the mbeq source. It's been fixed in the LV2 version of the plugin, but AFAIK has not been fixed in the v1 plugin. Correctly the logic allows the plugin to process without crash.
P3 When a Time Track and Label Track is present, audio is not pasted into all tracks, leading to desynchronisation.
P3 Residual FFmpeg issues:
  • "Select file(s) for batch processing..." dialogue lacks "All Supported files" and "FFmpeg-compatible files" filters
  •   Importing FFmpeg formats when FFmpeg library missing should raise the "FFmpeg not found" error, not the generic "not supported" error. Provisional fix in place, but throws multiple FFmpeg errors per file, then the relevant error for the particular format
  • In non-FFmpeg builds, attempting to import FFmpeg-supported formats should give an error that suggests downloading FFmpeg. Impossible to fix completely without breaking Importer abstraction: in non-FFmpeg builds ImportFFmpeg plugin does not exists and cannot suggest anything to user, while Importer should not know which formats are supported by ImportFFmpeg, thus being unable to suggest anything either.
P3 On-Demand: when importing a mixture of uncompressed and compressed files, on-demand loading does not start until normal import of the compressed files completes, if the names of the compressed files come earlier in the alphabet.
  • GA: On Windows, video files with a preceding name which similarly held up on-demand loading are as of 07 Oct 08 now importing second when dragged in, so the OD file is not delayed, but the tracks are now out of alphabetical order in the track list. Also, correct alphabetical order when using File > Open or Import now depends (on Windows) on the order the files are selected in. GA suggests therefore we could prioritise OD files to import first, then re-order the non-OD files in the track list if needed.
  • MC: Fixed 14 Dec 08.
  • GA: 24 Jan 08 - not fixed on Windows, except that files now import in alphabetical order irrespective of the order they were selected in. The basic problem remains: using "All supported files" filter, any compressed file (audio or video) that has a preceding name prevents OD loading of an uncompressed file with a following name. until the compressed file has loaded. So, much of the benefit of OD loading is lost.
  • MC: Discussed in Feb. 09 as resolved for the time being, but the discussion is still open. The implemented solution is different from planned to minimize UI blockage: Order of sort depends on loading method (open vs import).
  • GA: Order of sort depends on loading method on Mac, but on Windows the non-OD file always comes first with both drag/import and open. Therefore, sort order is always wrong if the non-OD file comes later in the alphabet, and we're not getting any benefit on Windows of OD files loading first. Do you see a way of getting OD to come first on Windows when using Open or context-menu opening? And is a resort after load practical? Out of order loading remains I think a P3 issue in itself.
  • MC: I forgot about the windows open behavior - it should be different. I just verified it on the mac, so I will need help or access to a windows machine to debug this. But in general the non OD files come first so that the UI isn't blocked while the OD files are being loaded, and thus the user can have the most time interacting with with the project while the files are being loaded. The new method still has sorted order, but its new sort hierarchy is filetype first, then name second, which seems like a reasonable behavior to me. A post-resort of the tracks seems actually disorienting, since the user is watching them being placed in this order as the files import. Thoughts?
  • GA: Yes thinking about it, I agree a post-load resort probably would be disorienting. I'm just conscious though of complaints about not importing in file name order, which I think is what the user will be aware of. If we drag in B.mp3 and A.wav, can we place A.wav above B.mp3 to begin with, when it starts to load?
P3 Preferences window: OK button does not work when a tab is selected in the left-hand panel.
P3 When changing language in Preferences, some elements don't change until restart. Affects Audio Track at the top of the Track Drop-down menu, and the toolbars tooltips (except Selection Bar).
  • LL: It looks like this has been partially fixed...the track menus now change, but tooltips are still an issue.
  • LL: This should now be fixed...just needs verification.
  • GA: Still an issue with generic track name ("Audio Track" in English) and Meter Toolbar channel names not changing, and with Selection Toolbar elements running into each other: after changing from English to French; then restarting and changing from French to English.
P3 R Pressing Play (but not spacebar) or clicking on the timeline in a second project when another is already playing stops playback of the first project.
  • zachelko: On Windows with Audacity 1.2.6 I'm not experiencing this. However, what seems to happen is that if a track in one project is playing and you attempt to play a track in another project, the play button does nothing and the track isn't started. Was this possibly the "fix" ?
  • GA: Because 1.2.6 does not have this problem, the bug is marked R , denoting it is a regression against 1.2.6. To replicate all issues on this list and Release checklist not aiming for 1.4, please test against latest CVS HEAD.
  • zachelko: This issue is deeper than just the "Play" function. Pressing Play, Pause, or Stop in another window while a track is playing in a different window behaves as if you hit those buttons in the window that has the playing tracks. I'm looking into a fix for this now. Was ControlToolbar.cpp over-hauled since the 1.2.6 release? By looking at it for the past 30 minutes or so, it would seem that a lot of these protections would have taken place in here...
  • zachelko: Submitted patch to mailing list 3/19/2009 to address Play/Pause/Stop spanning across all open windows. Timeline issue still exists.
P3 Calculation of "disk space remains for recording (time)" incorrect when recording in 24 bit quality. Macro now created by RA to return size on disk of 16/24/32 bit sample formats as 2, 3, 4 respectively as first part of a fix, but Audacity does not currently record in 24 bit.
P3 Tag import/export occasionally non-orthogonal. Some known specifics:
  • WAV fields only seen patchily by other apps. as their support is patchy, but Genre tag consistently not seen.
    • GA/LL: Although it's a valid WAV info tag (IGNR), we don't support it because current and next libsndfile doesn't. We could patch libsndfile locally, but may be better to switch to taglib when they next release, as that will have AIFF and WAV support. Also because AIFF is written to an ID3 RIFF chunk, that will support AIFF tags in iTunes as standard instead of the current ad hoc adding on to libidtag.
  • GA: OGG metadata seems perfect on Windows except VLC sees no tags at all. How is Linux/Mac? Taglib should improve compatibility with VLC, K3b and Amarok.
P3 (Windows only)

LADSPA plug-ins not categorisable despite compiling with USE_LIBLRDF defined and installing RDF data files in Audacity data directory. See this thread

P3 (Windows only) The slv2 library needed for LV2 support does not build.
  • GA: Is slv2 building on Linux?
  • DanH: For me it fails (on Linux) but can be fixed by running libtoolize.
P3 (Windows Vista only) System mixer level sliders and Audacity level sliders act independently. As a result, achieved recorded level only matches level indicated on the Recording VU meter if the Audacity input slider is at 100%. Reported by David Bailes. Should also be checked on Windows 7.
  • DB: On Windows XP, Logitech USB desktop microphone gives similar behaviour (independent system and Audacity input sliders, and the Audacity slider applies a gain not reflected in the Recording VU meter).
  • GA: My experience with USB external sound cards and USB turntables on a number of XP machines shows no replicable problems as described. Needs further verification by others.
P3 (Linux only) JACK issues:
  • in 1.3.5 from Ubuntu repository, Audacity crashes as soon as play or record started if JACK device selected in preferences (not tested built from CVS)
  • JACK has to be shut down before starting Audacity
  • Connections in qjackctl not persistent in Audacity session: they only become visible when playback or recording starts, and close when playback or recording stops. Several Linux applications have this problem, but for example alsaplayer seems to have solved it by changing their code? See this Linux musicians thread and this Forum post
  • Recording dropouts - these are grouped together with similar Mac problems as a P4 issue, but they might not be related
  • Crashes when recording full duplex?
  • Audacity must have same sample rate as JACK (seen in 1.3.4 Ubuntu repository builds)
P3 (Linux only) After opening a sufficiently long audio file, opening a second file of any size leads to locked GUI/console messages until first file completes play. Reported by Michael Schwendt on Fedora 8 test rpms of Audacity CVS from 11 Jan 08 and Jim Cline on Debian 31 Jan 08.
  Expression 'ret' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1034
  Expression 'AlsaOpen( hostApi, parameters, streamDir, &pcm )' failed in
  'src/hostapi/alsa/pa_linux_alsa.c', line: 1066
  • DanH: Confirmed on Arch
  • JC: Therefore promoted from P4

P4 / P5 Other Issues (not Release Noted)

P4 Users insufficiently aware of "export" because the word is not found or understood.
  • JC: Possible solutions include moving export next to save-as in menu and navigation from save-as to export.
  • GA: Navigation solution probably too confusing; naming/ordering of menu items, and (possibly) tooltips over menus or status bar indications probably more productive. See this Forum topic. Issue is more than cosmetic because of support overhead answering "how can I join the .au files I saved so I can play them in iTunes"; and because greater prominence of "export" would reduce the risks from over-reliance on projects. These are fragile in novice users' hands, and occasionally unreliable due to not-understood bugs in the code.
P4 Recordings of audio played in Audacity are truncated by approximately 100 ms.
  • GA: To reproduce:
  1. Generate 2 seconds tone
  2. Record from stereo mix (or line-out patched to line-in) with "overdub" on
  3. observe the last 100 ms of the track above is missing from the recording
P4 "Automatically fit" preference: resized track snaps back to fit after any edit or gain/pan change.
  • GA: Many users find this irritating because you cannot adjust gain and pan in one step, or leave track dragged down while adjusting gain/pan.
  • GA: Agreed solution is to change behaviour so that fitting only occurs automatically when adding or deleting a track.
P4 "Automatically fit" preference: tracks not re-fitted if tracks added or deleted then undone/redone.
P4 "Automatically fit" preference: Time, Label, and Note tracks not re-fitted.
P4 "Advanced Mixing Options": Names of all input tracks scaled unreadably small if any input tracks have a long name.
P4 Selection bugs when zoomed in
  • GA: may also be (partly) responsible for unpredictable behaviour dragging clips - see here
P4 When Control Toolbar is undocked, its associated shortcuts only work if the main application has focus.
P4 Minimum and maximum frequency display in Spectrograms preferences don't work for spectrum log (f) view.
P4 Memory leaks:
P4 (Mac only) Command-modified shortcuts that are also system shortcuts always perform the system action. For example, Command-M does not add label at playback position, but minimises the app. List of system shortcuts.
P4 (Mac only) CoreAudio crash when input device's sample rate is 44100 and the output device's sample rate is 48000.
P4 (Mac only) Envelope points do not restore properly when reopening a saved project -see here .
  • BP: Reproduced on 1.3.3 - 10.5.1, PPC iBook G4 on 28 Mar 08, but *not* on Intel Mac
  • GA: Should be tested with CVS HEAD and PPC, and escalated to P2 if confirmed?
P4 [LL] (Mac *and* Linux only) Random bits of silence occur during recording (Jack and non-Jack versions of this problem).
  • JC: Progress: Udo tried smaller blocksize in linux/jack version of this problem and can now fault after 4 mins. Perhaps small blocksize will help us track down the problem on non-Jack set ups too. However, perhaps Udo's progress is only relevant to using Jack and no help to Mac? And this problem does not occur consistently on a given system?
P4 (Linux only) Intermittent crashes removing a label track.
  • Adding a Label Track causes Edit > Paste to flicker (the code does enable it), then closing the Label Track causes a replicable crash (reported by Darren)
  • Removing an audio track then a label track may crash multi-track projects, reported by Zach.
P4 (Linux only) Defining EXPERIMENTAL_SCOREALIGN prevents building on Linux.
P5 "Latency problem" warning when audio is pushed behind zero occurs for both tracks of a stereo pair.
P5 R (Windows only) Executable will not launch in Safe Mode but runs an unkillable process.
P5 Pressing OK in Preferences removes action-specific text in last Undo menu item.
P5 Standardise per-platform behaviour after changing Default Sample Rate in Preferences: On Windows, changing the rate in Preferences changes the visible project rate at once, so affects all new tracks in current project. On other platforms, visible project rate does not change until opening a new project. This creates problems in the Manual. Windows users seem to like current behaviour and report a bug if the visible rate does not change. We need to decide. Similarly, on Windows, a new track in the current project takes the changed default sample format at once.
P5 Debug Log window and Help > Index... browser do not escape.
P5 Links from built-in text to Wiki to be locally over-ridable in the same way that links from built-in text to external html files can be. This way we can have a local copy of the relevant Wiki pages, if we want to.
P5 Dependencies Dialogue: If click on "Copy Selected Audio Into Project" in error, the copying cannot be cancelled from the progress dialogue.
P5 Re-enable file writing within Nyquist so that Nyquist plug-ins can remember user settings. Be careful about permissions with file writing, and whether and when we allow over-writing of existing files. Needs someone with detailed LISP knowledge to look at it. Assumption is that we need to re-enable code intentionally disabled, not write new code.
  • JC: xlisp functions such as xwrchar, xprint and xopen :OUTPUT seem to be already present and correct. Can't find disabled code. DS hypothesises it is code missing in 'the bridge', whatever that is.
  • LL: This isn't an issue. All XLisp and Nyquist functions are now available.
P5 When writing a file as a result of a Nyquist prompt, file either is not written, or written to a location that is not asked for. See here for details.
  • LL: I don't believe this to be a problem. In the first example, the file will go to whatever the current directory is. The Lisp function (setdir) can be used to discover/change what that is. In the second example, you'd have to use a double backslash "c:\\progr..." to get it work work properly.
P5 Issues believed to result from Audacity implementation of Nyquist:
  • Excessive memory usage
    • LL: This will have to be resolved by adding memory pool tracking to lib-src/libnyquist/nyquist/nyqsrc/falloc.c so it can be freed when needed.
  • Inaccurate length generation on first use of the plug-in at the default value offered. Correct duration obtainable by using slider or text box to change the value away from, then back to the default (example: pluck.ny)
    • LL: I'm unable to reproduce this and experimenting shows that it has probably been fixed.
  • Other inconsistent length generation issues which vary from time to time/one plug-in to another/one Audacity version to another for no apparent reason.
    • LL: This was probably related to the *WARP* variable not being set consistently and should now be fixed.
  • Values of sliders in the Audacity effect seem to be re-computed from the pixel values of the slider as visible on-screen, so the nearest value obtainable by using the slider is presented when launching/re-using the plug-in, rather than the coded default or last entered value (example: highpass.ny). Compute the value from the text field then set the slider? See this thread
    • LL: The first part of the issue "100 becomes 101" will have to be resolved and is happening at the lines mentioned in the report. However, this only occurs on redisplay of the dialog. So, if you enter 100 and click OK (or press ENTER), 100 is what will be used when applying the effect. The second part "1.0 = 0.997" is normal floating point behavior.
P5 (Windows only) Timer Record progress dialogue reappears underneath programs restored to the desktop after hiding the dialogue with "Show Desktop". Also the progress dialogue ought to disappear with the WIN + M equivalent shortcut, but doesn't.
P5 (Mac only) When Preferences set to "Update display", trying to change timeline position during playback (for example by dragging horizontal scrollbar) causes playback cursor to desynchronise until playback stopped.
P5 (Linux only) Intermittent crashes using Undo command (irrespective of command being undone).
  • Reported by Darren on Ubuntu Gutsy 7.10 with 2.5 GB projects.
P5 (Linux only) Recovery action if project rate not supported by card. OK on Windows.
  • GA: What does this mean exactly? Is it that the project rate is not remembered when recovering as reported on -devel list in May 2007? As at May 08 it is set on Windows.
P5 (Linux only) Miscellaneous OSS crashes.
  • Crash reported by SIEGERSTEIN: 'failed in 'src/hostapi/oss/pa_unix_oss.c', line: 1206'
  • Mihail's issue: PA19 uses oss; without load/compile oss support in alsa (snd-pcm-oss), Audacity crashes on init PA19.
  • GA: Are these still replicable or are they fixed with the PA updates?

Not aiming to do for 1.4.0

This has moved to release checklist not aiming for 1.4 and now includes former "Aim tos" from this page. Many of these "Aim tos" are relatively small items but could nonetheless make a worthwhile difference for the time involved. Please do not forget them.

If you claim ownership to items in "Not Aiming", please cut them from that page and park them here:

Truncate Silence needs a "remove DC bias" before running the effect.

  • RS: Started to fix this bug 04 Apr 2009