Talk:Enabling Note Track playback on Mac

From Audacity Wiki
Revision as of 11:30, 1 August 2017 by PeterSampson (talk | contribs) (trimmed out the non-IAC driver stuff)
Jump to: navigation, search

In addition to a sofware synthesizer (for playing Note tracks, MIDI files, on MAc) you may need to install and set up an IAC driver and make the software synthesizer listen to it.

Virtual MIDI port

A virtual MIDI port is a piece of software that runs in the background to send/receive MIDI messages from other programs or hardware devices.

The IAC (Inter-Application Communication) Driver in macOS allows you to create virtual MIDI cables between applications in this case Audacity and the software synthesizer.

You are likely to have to install and configure the IAC Driver on your Mac: 1) quit Audacity

2) Open Audio MIDI setup using Applications > Utilities > Audio MIDI Setup   Mac AMS.png

3) You should see the drivers setup window

Mac Drivers setup.png
If you don’t see that window, go up to the top left of the screen and go to Audio MIDI Setup > Preferences and make sure the box called “MIDI Window” is checked on. Then close and relaunch Audio MIDI Setup.

4) Double-click on the IAC Driver icon and you should see:

Mac IAC Driver Properties.png
If the Ports list is empty, you don’t have any ports set up. To add a new port, click the “+” button. This port will now always be there (potentially unless you upgrade your OS version – then you might need to go through these steps again).

5) To use the IAC Driver, first you must turn it on. Click on the "Device is online" checkbox

Mac IAC driver checked online.png
And then click the Apply button.