Windows Vista OS
|Windows® Vista was introduced by Microsoft on July 22nd 2005. It introduced significant technical changes to audio compared to previous versions of Windows.
- 1 Audacity and Windows Vista
- 2 System requirements
- 3 Audio architecture
- 4 Sound Device Drivers
- 5 Known Issues
- 5.1 Crash on pressing Stop
- 5.2 Compatibility Mode
- 5.3 Association with Audacity Project Files in 1.2.6
- 5.4 Cannot be added to "Open With" menu
- 5.5 Mixer Toolbar has no recording sources in 1.2.6
- 5.6 Using the Control Panel to select/enable recording devices
- 5.7 Specific help recording computer playback or streaming audio
Audacity and Windows Vista
Current versions of Audacity fully support Windows Vista. The new 2.0 series of Audacity replaces the elderly 1.2 line which does not support Windows Vista.
- Please subscribe to our announcements mailing list to be notified of new releases containing improvements for Windows Vista as we make them.
- Please let us know of any reproducible problems you encounter with Audacity and Windows Vista. Before writing, please check this page, the Release Notes for the current version and Known Issues for any issues discovered since release of the current version. The Windows 7 page also has information relevant to Vista.
- If you just want help, such as advice on setting up recording inputs or similar topics, please check this page then use our Forum or -users mailing list. See Asking Questions for details.
Here are the recommended memory (MB or GB of RAM) and processor speed (GHz) requirements for using Audacity with different versions of Vista:
|Starter *||512 MB ** / 1 GHz||384 MB / 800 MHz|
|Home Basic||2 GB / 1 GHz||512 MB / 1 GHz|
|Other Vista versions||4 GB / 2 GHz||1 GB / 1 GHz|
|*||Windows Vista Starter ships on lower-cost computers sold by original equipment manufacturers (OEMs) and Microsoft OEM distributors in 139 "non-developed" countries outside USA, Europe, Japan and Australia. Only three programs may run at a time.|
|**||Maximum 1024 MB|
Note that the minimum system requirements as defined above (i.e. those that allow the operating system to run, ignoring what is required to run applications) are much greater than for Windows XP. If your computer does not significantly exceed these minimum requirements then you may have problems doing more intensive tasks in Audacity such as recording for long periods or editing a large number of long tracks, or may need to close other programs and processes before you can do so. Please be aware that the cheapest "deals" for new Vista machines may well only include the Vista Home Basic Edition and system specifications little in excess of the Vista minimum requirements.
Other things being equal, 64-bit versions of Vista will require more RAM than 32-bit versions. While some users report Audacity runs fine on 64-bit Vista with 2 GB RAM, this depends on the number of tracks being worked with and the number of other programs and services running on the computer. Memory is now very inexpensive. The general recommendation for 64-bit Vista is to install a minimum of 4 GB RAM - and for very best performance, install the maximum RAM that your motherboard supports.
Many changes were made to audio architecture in Vista, which have persisted in Windows 7. These include:
- Individual output volume sliders for each application. Note the Audacity output slider on the Mixer Toolbar controls the overall system output slider, not its own application slider provided by the system.
- A new audio stack called Universal Audio Architecture
- A new WASAPI Audio API, isolating audio more from the system kernel. This has the advantage that a problem with an audio device driver now does not crash the whole computer as could often happen on previous versions of Windows. The downside is that the two audio APIs supported by Audacity, MME and DirectSound, are now "emulated" - they can only access the audio hardware indirectly through WASAPI. DirectSound under Vista has thus lost the advantage of having theoretically lower latency compared to MME.
Direct hardware access in Vista and 7 is available under WASAPI through a new "WaveRT port driver", but Audacity can't support this until the PortAudio audio interface we use fully supports the WASAPI Audio API. Similarly, WASAPI has a loopback recording feature that Audacity could potentially use on Vista and 7 for recording streaming audio.
- The concept of a "Default Format" for the audio device, set in the system mixer. Problems can arise with resampling if the Audacity project rate (bottom left of the window) does not match with the Default Format.
- An audio device can be "shared" with other applications, or it can allow applications to take "exclusive" control of it. Choosing the Windows DirectSound API in Devices Preferences in Audacity will allow Audacity to take exclusive control of the device, if this is set in the system mixer. To set this, right-click over the audio device, click Properties, then the "Advanced" tab. Using DirectSound and exclusive mode should avoid problems with resampling if the Audacity project rate does not match the Default Format.
For more reading, see:
Sound Device Drivers
Drivers are the piece of software that tells your computer how to talk to the specific hardware you have installed or connected to your computer. These are normally made by the manufacturer of the sound device or motherboard, and not by Microsoft. If you only have Microsoft sound drivers (for example because no Vista drivers matched to your hardware were available when the system was built), these will be generic drivers which won't be specifically matched to your hardware, and may cause problems sooner or later.
On Vista systems it's especially important to have dedicated drivers for your computer's sound device which are both specific to your computer hardware and specifically meant for Vista. This is because the drivers on a Vista system need to communicate with the hardware and the operating system differently than they do on earlier Windows systems, and so need to be designed for Vista. If you've installed Vista over a previous XP installation, ensure you don't use the drivers meant for XP that will probably be on the drivers CD that came with the computer.
Also make sure that if you have a 64-bit version of Vista, the sound device uses 64-bit drivers.
Updating the sound device drivers
Even if you don't have any immediate playback or recording problems, it's strongly recommended on any new Vista machine or any system upgraded to Vista that you try to update your sound device drivers, using Windows Device Manager. If Device Manager cannot obtain drivers other than from Microsoft, or if you are having recording or playback problems even with the latest non-Microsoft drivers, seek appropriate drivers direct from the sound device or motherboard manufacturer.
Access Device Manager by clicking the, then scroll down and click on . If you have "Classic View" enabled, there is a direct link to Device Manager in the Control Panel. Then expand " by clicking on the sign, right-click over the sound device and click .
After the update (even if more recent drivers were not found), you should right-click over the device again, clickand then on the Driver tab to check the "Driver Provider". As stated above, you don't want drivers from Microsoft. So, if you have now got updated non-Microsoft drivers, try them and see if they work fine or if any problems you were having are cured. Otherwise, note the name of the Driver Provider (if it's Microsoft, note the name of the sound device you right-clicked over), and visit the manufacturer's website. You can search Google or Yahoo to find the correct internet address of the manufacturer.
If you have a PCI or external soundcard you would go to the website of the soundcard manufacturer. If you have integrated motherboard sound, try first at the website of the Driver Provider or stated manufacturer of the device. If this manufacturer does not offer driver downloads, go to the site of the motherboard manufacturer for assistance. When you visit the motherboard manufacturer's website, you will need to know details of your motherboard. If you don't have details to hand, the CPU-Z utility will help you gather relevant information.
Always look for a driver update which is specific to your computer model and to your version of Vista (for example, 32- or 64-bit). Be sure to uninstall the old drivers of the device (right-click over the device in) before installing the new ones.
Unfortunately Windows Vista (and any version of Windows) may only come with a pre-installed, generic Microsoft driver for the motherboard sound chip. This Microsoft driver may not offer a "stereo mix" or similar device to record computer playback, and/or lack other functionality.
To find out if you are running the Microsoft default audio driver, check Windows Device Manager in the Control Panel. Look for the section "Sound, video and game controllers" then right-click and select Properties to check if the driver is from Microsoft. If some generic name without a manufacturer's name is listed (like "High Definition Audio Device"), then you should update this driver to a driver that is provided by your sound chip or motherboard manufacturer.
This is how the generic Microsoft audio driver looks:
This is an example of how it should look once a matching audio driver for your specific sound chip is installed (of course your sound chip may not be by Realtek):
Updating the driver may be a bit challenging, because you will need to uninstall the Microsoft driver and install a custom driver without rebooting inbetween (otherwise the Microsoft driver will reinstall silently). To easily update to the correct Non-Microsoft driver, download the matching driver from your audio chip or mainboard manufacturer's website and unzip the driver package. Then right-click the Microsoft "High Definition Audio Device" driver or similar, select "Update Driver Software..." and then point to the path of the unzipped drivers you just downloaded and install them. Note: Uninstalling the Microsoft drivers first is potentially safer, but updating gives an easy right-click option to "roll back" to the generic drivers without reboot if there is any problem with the new drivers.
Another alternative if you have a drivers CD that came with the computer is to install manufacturer's audio (and video) drivers from the CD. You can always search periodically on the web in case updated drivers are now available.
Crash on pressing Stop
Audacity 1.2.6 is quite frequently reported to crash on Vista after pressing the yellow Stop button. Please upgrade to the current version of Audacity which should not have this problem.
Audacity 1.2.6 and older 1.3 versions of Audacity may install on Vista in compatibility mode for Windows 95, and this may cause problems or error messages, or cause Audacity to crash when launching. Use the current Audacity version instead, which should not have this problem.
Association with Audacity Project Files in 1.2.6
When running the installer, you can optionally associate Audacity Project (.aup) files with Audacity, so that double-clicking an .aup file will launch Audacity if it is not already running. However on Vista, the .aup extension did not get associated with Audacity 1.2.6 as it should, and instead an "access denied" error occurred when double-clicking an .aup file. This should be fixed in the current Audacity version.
The Audacity executable cannot be added to the Explorer "Open With" context menu if there is already another "audacity.exe" (or an "Open with" registry entry for it) on the system. You could try this tool to create an "Edit with Audacity" context menu item instead. Alternatively, rename "audacity.exe" to some other name.
Mixer Toolbar has no recording sources in 1.2.6
Unlike previous versions of Windows, Vista treats individual recording sources such as line-in, microphone and "stereo mix" as recording devices in their own right. As a result, on Vista operating systems the Mixer Toolbar input selector in 1.2.6 will be always be greyed out by default. To fix this, upgrade to the current Audacity version where input device/source combinations can be chosen in Device Toolbar.
Here is an example of recording inputs in the Device Toolbar for two different physical devices (an inbuilt sound device and an external USB sound card):
Microphone: Realtek HD Device
Line-In: Realtek HD Device
Microphone: USB Audio
Line-In: USB Audio
Stereo Mix: USB Audio
Note that the "Recording Device" dropdown in Preferences and Device Toolbar can only show devices that are enabled in the Windows Control Panel. If the input you require is not listed in the dropdown, or is not apparently recording properly, try going to the Windows Control Panel to enable and select it (see the next section).
Using the Control Panel to select/enable recording devices
The quickest way to access the Control Panel is to right-click over the speaker icon in the. Or click (if you're using "Classic View" there's a direct link to "Sound" in the Control Panel), then click on the "Recording" tab.
Simply click to select the input device you want to use. Then make sure its input volume is turned up. To do this, click the Properties button bottom right, then the Levels tab, move the volume slider to right, and click OK.
Vista users often report that by default the Control Panel does not display all available devices. If the input you want is not shown, right-click over any device in the list, and put a check mark by "Show Disabled Devices" and "Show Disconnected Devices". To enable a particular device, right-click over it and put a check mark by "Enable". Note: an input device such as microphone or line-in that requires a physically connected input may appear as "currently unavailable" (and will be missing in Audacity's Device Toolbar until it has an attached input.
Once you have enabled and selected the input you require in the Control Panel, go back to Audacity and if necessary, exit and restart it. The input you want to record from should now be pre-selected in the "Recording Device" dropdown, and should record. If it does not, or if you still cannot see your required input in the Control Panel, update the drivers of the sound device.
Specific help recording computer playback or streaming audio
There is often confusion over what input source to choose for recording sounds the computer is playing. The required source can go by various names such as: "Stereo Mix", "Wave Out", "Sum", "What U Hear" or "Loopback". The exact name (and even if you have such a source option) depends on the drivers of your sound device. Try to enable and select a suitable option in the Windows Control Panel as described above, then if necessary update your sound device drivers.
There is no guarantee your sound device will have an option to record computer playback - the inbuilt sound devices on many low-end Vista systems running Vista Home Basic often do not. If all else fails, try connecting a cable from the line-out (green) port of the computer to the line-in (blue), and choose the line-in as recording source. If you need to hear what you're recording, you can buy a single stereo to double stereo adaptor that will give you a spare jack to plug the speakers into. Alternatively, try which is a virtual sound driver distinct from your sound device and installs as a browser plug-in, or buy an external USB sound card. These normally offer a "stereo mix" type of option, but check its compatibility with Vista.