Release Notes 2.0.3
|Audacity 2.0.3 was available from 21 January 2013 until 05 September 2013 for Windows, Mac OS X and GNU/Linux. These Release Notes describe:
- 1 Changes between 2.0.2 and 2.0.3
- 2 Known Issues at Release
- 2.1 Headline issues
- 2.2 Accessibility
- 2.3 Chains
- 2.4 Compiling
- 2.5 Effects and Analysis
- 2.6 Envelopes and Clips
- 2.7 Imports and Exports
- 2.8 Installation
- 2.9 Interface
- 2.10 Keyboard Shortcuts
- 2.11 Label Tracks
- 2.12 Miscellaneous platform-specific issues
- 2.13 Mixer Board
- 2.14 Playback and Recording
- 2.15 Preferences
- 2.16 Program Launch
- 2.17 Projects
- 2.18 Time Tracks
- 2.19 Toolbars
- 2.20 Bugs requiring more investigation
- 3 Lower rated issues
|Notes for Windows:
Changes between 2.0.2 and 2.0.3
- Crash using Undo whilst time-shifting a track.
- Crash using Repair if the selection extended into an empty track.
- Export Multiple didn't prevent export if there was no audio or all audio was muted. This allowed export of small invalid files.
- Loop Play of a speeded-up track inserted silence.
- Playback and rendering was significantly inaccurate, creating audible and visual glitches.
- The mnemonics character "&" was read out by screen readers in most of the Preferences choices.
- NVDA did not read static text in most dialogs. Text can now be read by using INSERT + B.
- JAWS and Window-eyes misread the "Duration" control in Silence Generator.
- Toolbar buttons could not be pressed by ENTER
- Other interface bug fixes.
Changes and Improvements
- The SoX Resampler library (libsoxr) has replaced libresample in Audacity releases, offering both higher quality and greater speed. .
Time Tracks new features
- "Set Range" now changes only the range of the Time Track, preserving the pitch/speed set by any existing warp points.
- Vertical scale added with options for linear and logarithmic display and interpolation.
- Upper and lower speed limits will now be remembered when saving and reopening a project in 2.0.3. Warp points in projects saved by previous Audacity versions will be correctly restored in 2.0.3.
- Warp points saved in a 2.0.3 project will be preserved if opened in previous versions but playback and display will be incorrect.
- Studio Fade Out (uses a filtered "S" curve).
- Adjustable Fade (accessible effect for creating partial fades and adjustable fade shapes).
- Bass and Treble (replaces Bass Boost).
- Real sample rates up to 384000 Hz are now supported for playback and recording in high resolution devices (the maximum is up to 192000 Hz for Windows DirectSound host).
- Labeled Regions in Edit Menu is renamed to "Labeled Audio" and now allows splits to be placed at point labels. Labeled audio regions that touch without overlapping are treated as separate regions. Overlapping labeled audio regions are treated as a single region.
- New Croatian translation of Audacity.
- CMake is required in order to build libsoxr.
Known Issues at Release
Projects with more than 2^31 samples (just over 13.5 hours at 44100 Hz) will not re-open correctly. Higher sample rates mean proportionally shorter times - so just over 6 hours at 96,000 Hz. We know the cause, and do intend to address this bug. Workaround: Before saving or closing the project, export to audio files of appropriate size, or cut and paste sections of audio containing less than 2^31 samples to new Audacity projects and save those.
Problems reopening, saving or crashing in projects
The following problems are very rare, but have the potential for losing data. The developers have not yet been able to reproduce these problems so please write to our feedback address if you encounter any of these symptoms.
- When attempting to reopen the project normally:
- The .aup project file was not saved (or incompletely saved, giving a "line number" error).
- Audio that was there previously is silenced.
- "Missing Audio Data Block File(s)", "Problems Reading Sequence Tags" or "Orphan Block File(s)" errors are reported. If you see these errors, please choose the options to "Treat missing audio as silence" or "Continue without deleting" the orphans.
- When working in the project:
- Errors occur when saving the project or when Audacity autosaves, perhaps wrongly suggesting the disk is full or not writable (if this happens, try exporting the audio as WAV).
- Unwanted renaming or moving of .au files within the project.
- Multiple or duplicated .aup files or project folders appear within the same project.
- Unexplained crashes or corrupted audio occurs (note this can happen if the computer is low on memory or disk space).
Please tell us all the actions you recall both the last time you had the project open and what happened this time, including error messages. We believe having multiple projects open at once, having projects open in file manager programs or long projects with many tracks are among the possible causes.
|As many as possible of the following will help us enormously if you can attach them to your report:
- (Linux) If you TAB into "Snap To" in Selection Toolbar, the selection and focus will become trapped. A mouse click elsewhere will be required to free the focus. Workaround: Access the required part of Selection Toolbar with TAB or SHIFT + TAB so as to avoid Snap To. Snap To can be set on or off by exiting Audacity, show hidden files and folders then add or edit the line "SnapTo=1" or "SnapTo=0" (without quotes, for on or off respectively) in ~/.audacity-data/audacity.cfg.
- Many, but not all parts of the Audacity interface are accessible on Windows and Mac to those who can't use a mouse, and/or use a screen reader. It may be possible to make more of Audacity accessible in the longer term. For details, see https://manual.audacityteam.org/o/man/accessibility.html
- There are some accessibility bugs in the parts of Audacity that are accessible:
- Some interface text or markings remain in black when using High Contrast light-on-dark themes, so cannot be read properly
- (OS X) Issues with VoiceOver:
- If you use arrow keys to navigate the Timetext controls in Selection Toolbar, VoiceOver stops reading. Workaround: Use Control-Option-W
- When you TAB forwards from "Audio Position" in Selection Toolbar, the "Selection End" or "Selection Length" radio button is read as "Selection Start". When you use COMMAND + F6 or COMMAND + SHIFT + F6 to move directly into "Selection End" from another toolbar, the button is read as "Selection Start".
- Mixer Toolbar input/output sliders are not read, just described as "multiple indicators". The "Graphic EQ" sliders in Equalization *are* read.
- Metadata Editor table not read.
- Edit Labels dialog not read.
- If you use arrow keys to navigate the Timetext controls in Selection Toolbar, VoiceOver stops reading. Workaround: Use Control-Option-W
- Chains do not currently support export as AIFF, Other uncompressed files or any formats supported by FFmpeg.
- You cannot set export format options or export sample rate in the Chain. If you need to specify export options other than the current default, import or generate some audio, File > Export, select the audio type, click "Options..." then choose and save the option and cancel the export.
- (Linux) When configuring effect parameters in "Edit Chains", the "Preview" button is not intended to be functional. Pressing it may cause a crash.
- (Linux) New libsoxr resampling library: Default ./configure will enable a new library libsoxr for resampling and disable libresample and libsamplerate (the previous resampling libraries). Cmake is required to build libsoxr. We strongly recommend libsoxr for its combination of high quality and high speed.
- Only one resampling library is permitted. If you enable either libresample or libsamplerate in configure, libsoxr will not be enabled. Any configure of resampling libraries other than libsoxr only will enable one only of libresample, libsamplerate or libsoxr in that order of precedence; however the intermediate configure output may suggest that other libraries will be favored.
- To enable libresample, your configure must include --without-libsoxr as well as --with-libresample.
- (Windows) Compilation with Visual Studio 2010 is not supported or recommended. See the Wiki page Developing on Windows for information.
- (Windows) LADSPA effects cannot be categorized even when Audacity is compiled with USE_LIBLRDF defined.
- (Linux) Audacity does not currently compile against very recent FFmpeg (0.10 or later are known to be affected)
Effects and Analysis
- LADSPA generate plug-ins may fail to generate into an empty track or into white space separating audio clips. Workaround: Before using the LADSPA generator, generate audio using any of the Audacity Generators above the divider in the Generate Menu, then generate into that audio selection.
- Truncate Silence may not truncate a silence that appears from Selection Toolbar to be the same as the specified "min silence duration". Sometimes the length displayed in Selection Toolbar is not exactly the same as the actual selection, due to the sampling of the audio. It won't be off by more than a sample though, which is a very tiny error.
- (Windows 64-bit) There is no HKEY_LOCAL_MACHINE\SOFTWARE\ registry key where Audacity detects VST plug-ins. The HKEY_CURRENT_USER key searched is HKEY_CURRENT_USER\Software\VST\VSTPluginsPath instead of the expected HKEY_CURRENT_USER\SOFTWARE\Wow6432Node\VST .
- (Windows and Linux) Some LADSPA "Blop" plug-ins ( http://blop.sourceforge.net/index.html ) are reported to crash in Audacity on Linux Debian. On Windows, the Blop plug-ins included in http://opensourcepack.blogspot.co.uk/p/ladspa-for-win32.html can also crash, but this can be avoided if you ensure the "blop_files" folder contains the necessary "_data.dll" files for the plug-ins and that this folder is present in the Audacity "Plug-Ins" folder.
- Cut Preview only plays the upper track of multiple selected or Sync-Locked tracks.
- LADSPA Multiband EQ may not be visible in Effect menu (occurs on Windows XP), and crashes soon after opening
- Nyquist effects render the space between clips as silence. Workarounds: Edit > Clip Boundaries > Detach at Silences (this could reduce the length of clips that have silent fades) or double-click each clip and apply the effect separately to it.
- Nyquist effects add spurious split lines if applied over clip boundaries.
- Nyquist effects: in locales where comma acts as the decimal separator, entering a comma in a text box to left of a slider only produces the whole number before the comma. Workaround: use a dot (period) as the decimal separator
- The following effects remove envelope control points: Change Speed/Pitch/Tempo; Equalization; Noise Removal; Sliding Time Scale/Pitch Shift; any Nyquist effect in the Effect menu. Workaround: Use Tracks > Mix and Render to apply the envelope to the waveform before applying the effect. Reverse retains the control points, but does not move them.
- Truncate Silence does not adjust clip boundaries inside the selection being truncated.
- Truncate Silence doesn't work intuitively if run on multiple tracks. It may be preferable to run it on each track at a time.
- Nyquist effects may crash Audacity if used on extremely long selections containing more than 2^31 samples (just over 13.5 hours at 44100 Hz). Workaround Apply the effect to multiple shorter regions (you can drag the selection back on itself to create a region contiguous with the previous one). Also note that projects containing more than 2^31 samples of total audio cannot be correctly saved.
- (Linux) Equalization: If EQCurves.xml or EQDefaultCurves.xml have corrupt XML syntax (for example, a missing closing ">"), Equalization will crash either on opening or after OK'ing a "Not well formed" error message.
Envelopes and Clips
- A clip may now be vertically dragged from inside a selection region, but if that region extends over the edge of the clip into space or into an adjoining clip there may be unexpected behavior:
- one channel of a stereo clip may jump sideways
- a mono clip may fail to horizontal-drag in its new track
- faint, specious clip lines could occur if the clip is dragged back to its original track.
- Workaround: Edit > Undo if necessary then drag from outside the selection region or single-click in the clip to remove the selection.
- Left-clicking in a stereo track to merge a clip at a split line may cause other clips to move. It is believed this only happens after having used the Track Dropdown Menu to make two mono tracks into stereo. Workaround: Select over the split line and Edit > Clip Boundaries > Join.
- When pasting audio into tracks with envelope points, the envelope points may move in unexpected ways, so causing unwanted amplitude adjustments.
Imports and Exports
- Files containing PCM audio but misnamed as MP3 cause a freeze or crash if an Extended Import rule is set in Preferences to force import of MP3 files using the MP3 importer.
- (Linux) After opening a sufficiently long audio file, opening a second file of any size leads to locked GUI/console messages until first file completes play.
- (Linux) Custom FFmpeg Export dialog does not respond to ENTER after clicking in the Formats or Codec selector.
- (OS X and Linux) When using Export Multiple, asterisks (*) or question marks (?) in labels are wrongly rejected as illegal characters, and forward slashes (/) cause a false "cannot export audio" warning. Workaround: To force use of * or ? (and / on OS X), export each region with File > Export Selection instead (/ is illegal in a file or folder name on Linux).
- (OS X) Files imported from iTunes could create invalid characters in the .aup project file in previous Beta versions of Audacity. If you re-open such a project in the current release, an error "reference to invalid character number" may occur. Workaround: Save and open a back-up copy of the .aup file in a text editor, turn off word wrap, then in the line indicated in the error message, remove the string of characters that starts with &# and ends with a semi-colon (;).
- (Windows Vista, 7) Audacity will crash if attempting to open WAV files while they are still being rendered by the open source Psycle tracker program.
- (Windows and OS X) If you import a file then use "End Task" in the "Applications" tab of Windows Task Manager or "Quit" from the Dock on Mac, Audacity crashes instead of asking if you want to save changes.
- If WAV/AIFF files are imported into a project using "Read Directly" import but then become unavailable, warnings are given when playing, recording, applying effects and exporting, but not all editing and project save actions are warned.
- If you import an audio file from a folder other than the one you last exported to, you cannot export over that file without changing the export directory manually.
- Album art and lyrics in imported metadata are lost when exporting.
- Exported "Comments" ID3 tags are not recognized by Windows Media Player or Explorer.
- Tags other than the seven default Metadata Editor tags will be rewritten as custom TXXX tags, which will cause them not to be seen in applications like Windows Media Player and iTunes. Common tag examples include "Album Artist", "BPM" and "Composer".
- Genre WAV info tag (IGNR) not supported due to limitation in libsndfile.
- ID3 v2.4 tags in imported MP3 files are not seen and will be removed on export.
- Audacity writes both ID3 v2.3 (TYER) and v2.4 (TDRC) tags for "Year", but any applications that require the older TYER on its own (without TDRC) will not see "Year" in Audacity-exported files. The id3 command-line application on Linux is one example.
- Other metadata import/export may not always be consistent. This may depend on the program that created the imported tags and the program used to read the exported tags.
- "Background on-demand loading" for FFmpeg (in the Libraries Preferences) does not currently allow changing the focus of waveform computation by clicking in the track. You can apply an effect to a selection wherever the normal waveform has appeared, but if you do so before the normal waveform has appeared, the audio will be silenced.
- By default, the importer used depends on the import method. For example, to be able to use FFmpeg to import native Audacity formats like WAV and MP3, you must choose the "FFmpeg-compatible files" filter in File > Open or File > Import > Audio and always use one of those import methods. To force FFmpeg to import native Audacity formats when using File > Recent Files or dragging in, add rules for those formats in Extended Import Preferences. To force FFmpeg import irrespective of the filter when using File > Open or File > Import > Audio, uncheck "Attempt to use filter in OpenFile dialog first" in Extended Import Preferences as well as adding the rule for the format.
- Export Multiple does not pass metadata common to all tracks to the Metadata Editor windows for each track. Workaround: Export by unchecking "Show Metadata Editor before export step" in Import / Export Preferences, then enter any tags common to all tracks at File > Open Metadata Editor... before exporting. Audacity will then silently add the common and automatically generated Track Title and Track Number tags for each exported file.
- Exports using Audacity's default "shaped" dither may be corrupted with near-silent audio flatlined at -1 if the project contains invalid data (such as a click at an excessive level). All further exports in that Audacity session will then be corrupted (even from different, valid data). Workaround: Go to the Quality Preferences and change "Dither" under "High-quality Conversion" to "Rectangle" or "Triangle" dither, or to "None".
- Import > Raw Data... imports files as noise if the Quality Preferences are set to 24-bit.
- WAV and AIFF exports will fail without warning if you import a WAV or AIFF by reading it directly, delete the file and its track then export new audio to the same file name and location as the deleted file. Workaround: Set the Preference in the above link to "Make a copy" of uncompressed files when importing.
- (Linux) AAC exports produce a zero bytes file if the Audacity project rate is below 22050 Hz. Additionally, the "Quality" slider in AAC export Options has no effect on the exported bitrate. "Workaround: Export as WAV and convert to AAC using FFmpeg at the terminal.
- On a fresh installation of Audacity or initialized Preferences, the optional FFmpeg library cannot be used for import of native Audacity formats such as WAV, AIFF or MP3. Workaround: Open Preferences and click "OK".
- When importing a MIDI track, the channel selection buttons to left of the track are not currently available.
- (Linux) Exports using "M4A (AAC) Files" are very slow irrespective of the AAC encoder FFmpeg is configured to use. Workaround: choose (external program) when exporting, entering an appropriate path and command (for example, /usr/bin/ffmpeg -i - "%f") to run FFmpeg using Audacity's command-line encoder.
- (Linux) Files exported using the FFmpeg native AAC encoder included with many system versions of FFmpeg are of very poor quality. This is an issue with the library itself. Workaround: When compiling FFmpeg, configure with the libfaac encoder thus: --disable-encoder=aac --enable-libfaac. Note that libfaac has an issue not present in the native FFmpeg encoder that saved files are short at the end by about 3000 samples.
- (Linux) Mono AAC files import as stereo if FFmpeg uses the libfaad decoder. This is again an issue with the library itself.
- (OS X and Linux) Entering a backslash "\" in a file name when saving a project gives a "Could not save project. Path not found." error.
- Audacity may freeze if using the Nero AAC encoder to export via (external program). It is reported this only occurs when using multiple CPU cores. Workaround: Export to AAC directly by adding FFmpeg to your computer, or set Audacity to use only one CPU core.
- Custom FFmpeg Export: many combinations of formats and codecs are incompatible, as are some combinations of general options and codecs. Some files may be exported as zero kb files.
- WAVEX (Microsoft) headers: GSM 6.10 files cannot be exported, and U-Law/A-Law files may not be playable.
- WMA: no metadata is exported if using the older FFmpeg 0.5 library due to a bug in FFmpeg. Metadata is supported in FFmpeg 0.6 but applications other than Audacity may not see all the tags.
- Dither noise is incorrectly applied by default if exporting to most formats where the bit depth is the same as (or higher than) the project. For example, this occurs if exporting to 16-bit WAV, 16-bit FLAC or MP3 from a 16-bit project. OGG is unaffected. Workarounds: Set "High Quality" dither to "None" in the Quality Preferences. To fix any files that have already been affected, see this Forum topic.
- (OS X 10.6 or later) Administrative (and occasionally, root) permissions may be needed on some machines to read the optional LAME and FFmpeg libraries at /usr/local/lib/audacity. In case of difficulty, please download the zip versions "Lame Library v3.98.2 for Audacity on OSX.zip" and "FFmpeg v0.6.2 for Audacity on OSX.zip" from the download site and extract the files to your own preferred location.
- (Linux) When self-compiling Audacity, LICENSE.txt and README.txt are installed into the root of the documentation directory instead of the $(AUDACITY_NAME) directory inside that.
- Selections locked to/only possible to click at whole seconds: We know that it is easy to check the "Snap To" box in Toolbar by mistake, which means you can't then select less than a whole second or click other than at a whole second. We have added a tooltip when you hover over "Snap To" which we hope will help, and will monitor if users are still enabling Snap To in error.
- (Linux) If Audacity is configured with the option to use libsamplerate, an action involving resampling outside libsamplerate's limits of 1/256 to 256x will cause the progress dialog to hang, or possibly a crash.
- (Linux) The OK button has focus on opening effects and other dialogs, instead of fields for changing values. This is a bug in wxGTK. To change values or settings in the dialog it is necessary to deliver a mouse click.
- (Linux) Using a file manager (for example, context menu) or the command line to open further files gives an error. Even if Audacity is closed, only one file can be opened from the file manager. Workaround: Use File > Open, or (for audio files) File > New then drag the files in.
- (OS X and Linux) In some locales, Preferences text may be truncated or overlapped, or dropdown boxes truncated.
- (OS X) The "Cmd - Wheel - Rotate" mouse binding does not zoom in unless you modify the default System Preferences. ** On OS X 10.6 or later, go to Universal Access / Seeing / Zoom / Options and uncheck "Use scroll wheel with modifier keys to zoom".
- Prior to OS X 10.6, go to "Mouse and Keyboard" and uncheck "Zoom using scroll ball while holding Command".
- (Windows) The "Files Missing" warning always restores maximised windows to smaller size.
- (Windows) There may be substantial delays drawing the waveform in some circumstances. These include fitting longer zoomed-in projects to the window, or when zooming in on fitted projects, also after importing files or running effects.
- After changing language in Preferences, a few parts of the interface don't change until Audacity is restarted.
- Audacity has several weaknesses in preserving the context of the audio being worked with:
- If playback scrolls, pressing Stop leaves the waveform where it stopped and the cursor invisible. Pressing Play to resume then scrolls the waveform to start at the left edge, hiding the previously visible context before the cursor position
- Current scrolling behaviour makes it too hard to watch the waveform progress, with a single shift of cursor and waveform position when cursor reaches the right edge
- Zoom to Selection shows none of the surrounding context
- By default, all audio in the project is selected if an action requiring a selection is requested when there is no selection (this behavior can be turned off in the Tracks Preferences). If enabled:
- You can always apply effects to the whole project in one step, but you can also delete audio in all tracks if you press Delete when there is no selection. That is easy to Undo, but we aim to tweak this behavior and make it more customizable in a future Audacity.
- A few items in Edit menu are incorrectly grayed out if no track is selected.
- If Sync-Lock Tracks is enabled, there is no indication of the cursor in the Sync-Locked tracks.
- If you save a region with Edit > Save Region then click OK in Preferences, the saved region cannot be restored.
- In projects containing an hour or more of total audio, there may be a delay compared to previous versions of Audacity when:
- Creating a label or label track
- Dragging selections with the keyboard (Workaround: Hold SHIFT then press left or right arrow a few times per second instead of holding the arrow key)
- Dragging sample points with Draw Tool
- Using Cut, Copy, Paste, Delete or Silence Audio.
The delay may be more evident on slower computers. In addition, label text may not be recovered if there is a crash.
- Mouse Bindings are not currently configurable by the user.
- Snap To state and Selection Format when Snap To is on are global. Therefore changing these in one project will make them show incorrectly in any other projects.
- Snap To does not move the cursor when first enabled or when the selection format is changed.
- We're aware that some error messages in Audacity are not as helpful as we would like them to be. If you see a cryptic error message from Audacity, try a search (or ask) on https://forum.audacityteam.org/
- (Linux) If Audacity is left open but without focus, its CPU use will rise slowly until all available system CPU is consumed. This is a bug in wxGTK 2.8.10 (not previous versions) - see http://trac.wxwidgets.org/ticket/11315 . This issue can be fixed by updating to wxGTK 2.8.11 or 2.8.12.
- For Package Maintainers / Distributors / anyone building against 2.8.10: The upstream change in wxGTK is simple and can easily be patched into wxGTK 2.8.10 if desired: Grab http://trac.wxwidgets.org/changeset/62397?format=diff&new=62397, run it through dos2unix (as it seems to come with dos line-endings), and apply it to the wxGTK 2.8.10 sources (with -p3 to get the paths right if you patch from the top level of the tarball distribution).
- (Linux) If the warning for importing uncompressed audio files appears before importing a WAV or AIFF, the Play/Stop shortcut may not play the file after import. Workaround: Click the Play button, or click in the waveform or background before using the Play/Stop shortcut. Alternatively, disable the warning in Warnings Preferences.
- (OS X) Set Rate > Other... in the Track Dropdown Menu does not display the current track rate unless that rate is in the list of set rates.
- (Windows) It is not yet possible to drag .lnk shortcuts to audio files or projects into Audacity, or to drag them to the Audacity executable's icon. Workaround: Use File > Open or File > Import > Audio, or double-click the shortcut to the .aup from Windows Explorer.
- (Windows) The Audacity executable cannot be added to the Explorer "Open with" context menu if you have another version of Audacity on the system which is also called "audacity.exe". Workaround: either use the "Open with" dialog to browse to the executable each time, or rename the executable to or some other unique name.
- (Linux) Complete or partial loss of Audacity menu bar
- 32-bit systems using wxGTK 2.8.12: If not using the Unity shell, closing Preferences may lead to loss of the Audacity Menu Bar (only "Fi" from "Files" will be visible). If using Unity, a small black square will appear, but the Audacity menu in the Global Menu is unaffected. Workaround for one session: Resize (or maximize/unmaximize) the Audacity window after closing Preferences.
- 64-bit systems using wx GTK 2.8.12 without Unity: Audacity may launch with no menu bar. Workaround for one session: Open and OK Preferences or open a new Audacity window.
Solution: This is a wxGTK bug, as reported here (http://trac.wxwidgets.org/ticket/13280) and fixed in changeset 67929 (http://trac.wxwidgets.org/changeset/67929). To resolve this problem, wxGTK 2.8.12 needs to be patched on the target system, ideally by updating the distribution package. This fix will be included in wxGTK 2.8.13.
- Dragging a clip or track up or down with Time Shift Tool does not scroll the project window when tracks exist out of view above or below the scroll. Workaround: Choose View > Fit Vertically before drag, or click and hold the piece to be dragged, use up or down arrow on the keyboard to scroll to the target track, then drag and release the clip or track.
- (Windows) SHIFT + A (Play/Stop and Set Cursor) and custom unmodified shortcuts for playback or recording write a label at the cursor position if the label track has the yellow focus border. Workaround: use up or down arrow to move focus out of the label track before using the shortcut.
- Shortcuts for Generators, Effects and Analyzers where you have to add your own key binding are not currently exported into the XML file. Shortcut changes for any commands are not applied after importing the XML file and pressing OK in Preferences.
- Typing "j", "J", "k", "K" or other shortcuts in a label track may activate the shortcut instead of typing in the label. Workaround: In many cases, Edit > Undo then Edit > Redo will allow you to type in the label. Otherwise, click Edit > Preferences: Keyboard, choose the correct category, then clear the affected shortcuts or change them to include a CTRL + SHIFT modifier or other modifier than SHIFT.
- (Linux) In projects containing several hundred labels or more, Audacity will freeze on 100% CPU when opening the "Audacity Karaoke" window, and will freeze again while that window is open when editing a label or performing other actions on the project. Workaround: Open or place an empty label track above the one you want to use.
- Unless Tracks > Sync-Lock Tracks is on, pasting or inserting audio does not affect labels even if the label track is included in the selection.
- Yellow "snap" guidelines do not appear in re-opened projects or imported label tracks when dragging a selection to a label edge if "Snap To" is checked and a high resolution Selection Format chosen. Formats affected include "hh:mm:ss + CDDA frames (75 fps)", "hh:mm:ss + milliseconds" and "hh:mm:ss + samples".
Miscellaneous platform-specific issues
- (Linux) If pulseaudio is used as the audio device, repeatedly starting and stopping playback or recording in quick succession (or holding down the Play or Record button) may lead to a freeze. Workaround: bypass pulseaudio by setting the playback and recording device to an ALSA/hw choice in Device Toolbar.
- (Mac OS X) If using Audacity when the "Hear" audio plug-in is running (or has been since boot), there will be excessive memory usage which could cause a crash: this appears to be due to buggy memory allocation in "Hear"
- (Mac OS X) Very occasionally, users may find that after running Audacity, other media players don't produce any sound, or crash: to resolve this, set up your sound device in Apple Audio MIDI Setup to work in stereo, 16-bit, with a sample rate of 44100 Hz or 48000 Hz, and set the sample format and rate identically in Audacity. More help at: http://audacityteam.org/forum/viewtopic.php?f=17&t=5064
- Soloing or unsoloing a track in Mixer Board when in "Standard" Solo button mode may not immediately update the Solo button or waveform greyed/ungreyed state in the project window. Workaround: Click anywhere in (or task switch back to) the project window to refresh it (on Mac, you must click in the waveform or Track Control Panel or wait for the tracks to scroll when playing).
- If you change the meter range in Preferences this is not reflected in the Mixer Board meters until restart.
- (Linux) Meters may not respond immediately to playback which could cause them to report incorrect peak level or not display clipping.
Playback and Recording
- (Windows) When you install Audacity for the first time or launch it after resetting Preferences, Audacity will choose a specific output and input device rather than the Sound Mapper devices that are the current Windows default devices. Workaround: If you lose playback audio or only record silence for this reason, use Device Toolbar to change the devices as needed, then Audacity will remember them.
- The Transport menu lacks Audacity's two combined "Play/Stop" commands, but these have shortcuts which can be used instead.
- "Play/Stop": Use SPACE. This starts or stops playback, returning the cursor to the start position when stopped.
- "Play/Stop and Set Cursor": Use SHIFT + A. This also starts or stops playback, but when stopped, sets the cursor to the stop position.
To change these shortcuts, or to add a shortcut for the separate "Play" and "Stop" commands shown in the Transport Menu, go to the Keyboard Preferences.
- (OS X and Linux) Audacity now works very well with JACK, with the following bugs and limitations:
- Clicking in the input meter to start monitoring will crash Audacity if it has not yet used JACK for playback or recording in that session. Workaround: Before recording the first track in a session, click "Pause" then "Record" to enable the recording meter.
- The best way to connect to available JACK inputs and outputs is directly from Device Toolbar. Use Transport > Rescan Audio Devices when necessary, for example to make new JACK applications ports available to Audacity. See here for details.
- On Mac, Audacity may freeze if JACK is launched by QjackCtl then Audacity is launched. Workaround: Use JackPilot to launch JACK, or launch QJackCtrl after Audacity and JACK are running.
- (OS X and Linux) PortAudio's default latency values which are used when recording with software playthrough are much lower than Audacity's default "Audio to buffer" setting. This may cause playthrough or recording glitches when recording with software playthrough enabled, especially when using pulse on Linux. Workaround for Linux: record from an (hw) device instead if software playthrough is required.
- (OS X) Playback to Bluetooth headsets gives an error. Workaround: Revert to Audacity 1.3.3 (this may only work with stereo headsets), or use Soundflower to send the Audacity output to an audio application that works with the headset.
- (OS X) The "Hardware Playthrough" option in Recording Preferences is currently unsupported on all known Mac hardware. Try the "Software Playthrough" preference instead. If that does not work, the third-party LineIn application also provides software playthrough.
- (Windows) When a USB device is connected, the Mixer Toolbar input slider for that device (and sometimes for any device) may wrongly appear active even though it has no control over the device's input level. Sometimes the Audacity slider will apply a software gain to the level (which is dangerous as it will only make the same clipped input quieter rather than stopping the clipping). Sometimes the Audacity slider will not affect the input volume at all. Workaround: use the slider in the Windows Control Panel where available, or any gain control on the device, or reduce the output being sent to the device.
- (Windows) Audacity is incompatible (or not fully compatible) with some professional soundcards or audio devices, and may crash or have limited or faulty functionality. Occasionally, this may be true of some AC97 devices built into the motherboard. Workaround: make a different soundcard your default when using Audacity, but please e-mail the following details to our feedback address:
- (Windows) Recording at 24-bit quality or higher isn't possible even with devices that support it due to current limitations in PortAudio.
- Adding or removing an external audio device while Audacity is open will not be automatically reflected in the list in Device Toolbar or Devices Preferences. On Mac, unplugging then replugging an external device will give "error while opening sound device" (on Linux, pressing "Record" a second time will remove the error). Workaround: Use Transport > Rescan Audio Devices.
- Calculation of "disk space remains for recording (time)" incorrect when recording in 24 bit quality.
- Play-at-Speed slider: Change of playback speed is no longer automatic after you move the play-at-speed slider. To change speed, move the slider, then click the green button to left of the slider to play at the new speed.
- Timer Record cannot maintain scheduled duration if system clock changes
- (Windows Vista, 7) If you change the explicit output and/or input device selected in Device Toolbar or Devices Preferences and then change "Host", the selected devices will change back to those originally selected.
- (Windows XP and earlier) Changing the default playback or recording devices in the Windows Control Panel while Audacity is open may cause all the playback or recording choices in Device Toolbar to produce silence (or to fail with "Error opening sound device"). This problem may also occur when connecting or disconnecting a USB device while Audacity is open. Workaround: Click Transport > Rescan Audio Devices then you can play or record.
- (Linux) Extended Import: Clicking "Move rule up" when there are no rules or filters causes a crash.
- (Linux) If a Bluetooth audio device is in use on a PulseAudio system, Audacity may hang on launch on initial attempts, then after eventual launch Bluetooth will no longer work on the system. Workarounds:
- Remove and reconnect the external Bluetooth adaptor, then launch bluetooth-applet from the command line.
- To prevent Audacity affecting Bluetooth support, move /usr/share/alsa/bluetooth.conf to another location then reboot, or create a symbolic link from /var/lib/alsa/asound.state to /dev/null and reboot.
- (Windows and OS X) VST/Audio Units Plug-ins: On first use and otherwise when requested, Audacity scans for and loads VST effects before the main interface appears. On OS X, Audio Unit effects are always loaded, which can lead to a very slow launch if there are many plug-ins. Occasionally, an incompatible or badly written plug-in may lead to a crash or freeze on launch. Known plug-ins affected:
- Waves Version 7, 8 and 9 Audio Units on OS X, Waves Version 5 on Windows
- Native Instruments Guitar Rig v3 and v4 on OS X (v5 does not have this issue)
- Native Instruments B4 on OS X
- AURoundTripAAC from "Apple audio mastering tools".
In a future version of Audacity we aim to defer loading of plug-ins until they are requested in the Effect menu. Workaround: If VST/AudioUnit effects are not needed in Audacity, force quit Audacity, then open Audacity's folder for application data. Open audacity.cfg in a text editor (or create audacity.cfg if it does not exist) then in the editor, make the audacity.cfg content to be only the following:
- (Windows) A dialog which is scanning for VST plug-ins will be seen on every launch of Audacity even when no VST plug-ins are present, if other DLL files are present in the Audacity Plug-Ins folder. Workaround: If VST effects are not required, choose Edit > Preferences, then under "Enable Effects", uncheck "VST", OK.
- There are currently no message box warnings when projects run out of disk space. If you run out of disk space when editing or recording, patches of silent or corrupted audio will appear, which will also be present if you save and reopen the project. Be aware that every edit on a track takes as much in disk space as if you were recording that track, due to the ability to undo and redo. You can go to View > History and discard Undo levels to free up space.
- (OS X) Crash closing project window immediately after saving project: After saving a project, if you close the project window immediately the "Saving project data files" dialog completes, there will be an unexpected "Save changes?" prompt and then a crash when you choose "Yes" or "No". As long as you say "Yes", the project will be saved correctly and can be reopened normally after you restart Audacity. To be sure there is no crash, wait after "Saving project data files" completes for any "Inspecting Project Data" dialog to appear and disappear before closing the project window.
- It is no longer possible to use Save Project or Save Project As to overwrite another pre-existing project, even if that project is not in use. Functionality to overwrite a project not in use will be restored in a future version of Audacity when we are sure it will always be safe.
- Time Track warp points saved in a 2.0.3 or later project will be preserved if opened in previous Audacity versions, but playback and display will be incorrect.
- Projects created by Audacity 1.1.x or earlier are no longer supported. Workaround: Export each project track as WAV using the appropriate legacy version of Audacity, then import the WAV files into current Audacity.
- Projects created by Audacity 1.2.x are partially supported - there is a possibility Audacity could corrupt them. Please make a backup copy of the project's .aup file and _data folder to a new folder before opening the project in this version of Audacity. Once you save the project in this version, it cannot be opened in 1.2.
- Projects created by previous versions of Audacity may contain audio "block files" longer than the project format allows. Reopening such projects in previous versions might or might not result in deletion of the overlong audio. Audacity has been provisionally fixed so that it can no longer create or delete overlong files, but it cannot read any such files it encounters. If overlong files are found, a "Problems Reading Sequence Tags" message will display .
- If you continue with the offered repair then choose "Continue without deleting" in the Orphan Block File(s) dialog, the overlong files will be retained as "orphans" in the project's _data folder but will appear as silence in the track(s).
- As long as you choose "Close project immediately" in the Orphan Block File(s) dialog, the project will quit and will not be changed in any way.
If you encounter the "Problems Reading Sequence Tags" message, please write to our feedback address with a copy of the .aup file and the log as found at Help > Show Log.
- Projects containing more than 2^31 samples (just over 13.5 hours of audio at 44100 Hz) will re-open empty with the entire data being seen as "orphaned files" (although the data "appears" to be in the correct location expected by the .aup file). Workaround: Before saving or closing the project, export to audio files of appropriate size, or cut and paste sections of audio containing less than 2^31 samples to new Audacity projects and save those.
- The lower and upper speed limits are not stored in the project, so will be restored to their default values of 90 and 110 respectively when reopening or recovering a project, or if removing a Time Track then undoing removal. Please make a note of the correct values before closing the project or the Time Track.
- (OS X and Linux) Using keyboard Undo while dragging envelope points or sample points will crash Audacity (this affects Envelope Tool, Draw Tool and Multi-Tool).
- Meter Toolbar vertical orientation is not remembered across sessions, and resizing the meters reverts from vertical to horizontal.
- (Windows XP) Transport and Tools Toolbar buttons all display as Pause buttons. The buttons may redraw correctly if you hover over them. Workaround: You can use keyboard shortcut alternatives for the buttons instead.
Bugs requiring more investigation
- (Linux) If Audacity is compiled with the option to use libsamplerate and the default "Best Sinc Interpolator" for high-quality conversion is used, Tracks > Resample may lead to truncation of the waveform. Workaround: change the project rate to the desired rate, export the track and re-import it.
- (OS X and Linux) After using Tracks > Mix and Render or File > Save Project, some keyboard shortcuts such as Play/Stop or opening a new project window have no effect.
- (Windows Vista) If you change the input volume in Audacity and then record, the volume is reset to its original level. This appears to occur mostly with a few specific USB devices, and sometimes only on Vista SP1, so it is currently hard for us to fix. Workaround: Check if the manufacturer supplies their own drivers for the device and try those. See if upgrading to Vista SP2 or Windows 7 helps.
- Please report make and model number of devices that exhibit the issue, also the drivers and exact version of Vista and Service Pack in use (for example, Vista 32-bit, SP1)
- (Windows Vista, 7) When a USB device is connected, the listing of inputs for the built-in sound device in Device Toolbar or Devices Preferences may become corrupt, indicating single inputs as multiple inputs. It may only be possible to record from the built-in input which is currently set as default at "Sound" in the Windows Control Panel, irrespective of the input selected in Audacity. Workaround: Try Transport > Rescan Audio Devices, or a computer reboot.
- Please report make and model number of devices that exhibit the issue, along with description of symptoms and any steps you have noticed that create the issue.
- (Windows Vista,7) On upgrading to the current Beta from 1.3.12 or earlier, "error opening sound device" occurs when recording from the inbuilt sound device where there was no error in the previous Audacity with the same device configuration and operating system. Workaround: Use Transport > Rescan Audio Devices, or go to "Sound" in the Windows Control Panel and click OK. Note that if devices listed in Device Toolbar are disabled in "Sound" then the error is legitimate - you will need to enable those devices.
- Please report make and model number of sound devices that exhibit the issue, along with driver version number. Please first ensure your sound device drivers are up-to-date and not generic Microsoft drivers - help available here.
- (Windows and OS X) Some USB or Firewire recording devices only record silence, or only offer mono recording for a stereo device, or only mono or stereo for a device that previously supported multi-channel recording. Workaround: You can try 1.3.10 Beta or earlier (including 1.2.5/6), but these versions may have other bugs or limitations.
- Please report make and model number of devices that exhibit the issue, and your operating system details (for example, Windows 7 Service Pack 1).
- (Windows) There may be substantial delays drawing the waveform in longer projects. These include:
- opening saved projects that were fitted to the window
- fitting an already zoomed in project to the window or zooming in on a fitted project
- progress dialog remains white for a long time after the progress bars complete for a file import or effect.
- (Windows, Linux) Timer Record may carry on recording past the scheduled end time resulting in Audacity having to be force quit.
- Importing WAV or AIFF files (possibly those created by Audacity) may cause a freeze or a crash. After this occurs, Audacity may become destabilized and crash again even without importing further files. It is believed to mostly affect Intel Mac machines and to be caused by memory corruption. Workaround: Reboot the computer.
Lower rated issues
Only issues deemed of sufficient impact and importance to release-note are listed on this page. You can search the complete list of bugs on Audacity Bugzilla or for particular categories of bugs thereon by visiting Bug Lists.